========================= Start =========================
3/1/2019 / 11:33:36 AM
=========================================================
Card found: S/N : 6728E6C5 , v0136
Chinese Miracle II [SPD module] v 1.27
Set mode to : SP [SC773x] eMMC [Android 6.x]
Start at : [3/1/2019 / 11:34:47 AM]
Operation : Read FullFlash [ v1.27 ]
1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
-> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key
3. Insert cable
==== Wait for phone...
Phone found! [ 11 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!
[FW_READER] : Prepare Ok!
- > Wait phone connected ...
Phone found! [ 11 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
- > Wait phone connected ...
Phone found! [ 11 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
Model Name : Flare_P1_Mini
Model Brand : Cherry_Mobile
Model Device: Flare_P1_Mini
AndrVersion : 6.0
BaseBand CPU: FLARE_P1_MINI
Project Ver : Cherry_Mobile_Flare_Lite_DTV2_V03_20170810
Model Ext : Flare_P1_Mini
[Read Mode] : HSUSB : 0x3000
[FW_READER] : Reading Firmware Now ...
[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731C_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_WCN_Trunk_W16.28.5_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_480x800.bin
[Read Ok] : fblogo_480x800.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Read Ok] : sysinfo.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Build Ok] : userdata.img
AndroidInfo created
Firmware Size : 1953 MiB
Saved to : D:\D files\Cellphone\Firmware\SPD\Firmware SPD\my back up\FLARE_P1_MINI_Flare_P1_Mini_6.0_Cherry_Mobile_Flare_Lite_DTV2_V03_20170810_Flare_P1_Mini\
Done!
Elapsed: 00:28:24
Reconnect Power/Cable!
Finish at : [3/1/2019 / 12:03:12 PM]
========================= Start =========================
3/1/2019 / 12:09:50 PM
=========================================================
Card found: S/N : 6728E6C5 , v0136
Chinese Miracle II [SPD module] v 1.27
Start at : [3/1/2019 / 12:10:08 PM]
Operation : Convert InfinitySC to SPRD PAC [ v1.27 ]
Target : FLARE_P1_MINI_Flare_P1_Mini_6.0_Cherry_Mobile_Flare_Lite_DTV2_V03_20170810_Flare_P1_Mini by HAKI
Step #1 : Identify
MEMORY : eMMC
LAYOUT : eMMC NORMAL
Step #2 : Select logic
Select Logic : SC7731
Step #3 : Processing data
Build PAC
[ADD FILE] : nvitem_w.bin
[ADD FILE] : nvitem_wcn.bin
[ADD FILE] : prodnv.img
[ADD FILE] : u-boot-spl-16k.bin
[ADD FILE] : sc7731C_CP0_modem.bin
[ADD FILE] : DSP_DM_Gx.bin
[ADD FILE] : sc8830g_modem_CP2_WCN_Trunk_W16.28.5_Release.bin
[ADD FILE] : logo_480x800.bin
[ADD FILE] : fblogo_480x800.bin
[ADD FILE] : boot.img
[ADD FILE] : system.img
[ADD FILE] : sysinfo.img
[ADD FILE] : cache.img
[ADD FILE] : recovery.img
[ADD FILE] : userdata.img
[ADD FILE] : u-boot.bin
Build Ok! Result : 0x0018
Sign PAC ...
Sign Ok! FW compiled!
Elapsed: 00:00:19
Saved to : FLARE_P1_MINI_Flare_P1_Mini_6.0_Cherry_Mobile_Flare_Lite_DTV2_V03_20170810_Flare_P1_Mini by HAKI.pac
Done!
