Search results

share ko lang ulit mga sir realme c2 passcode dis asemble ang unit solder ISP connection open JTAGManager select model check mmc/sd select resurrection tab click resurrection tick factory reset tapos ulitin lang frp reset nman finish

share ko lang mga boss iPhone 6 no back Backlight basic muna ginawa ko mga sir check ko kung malinis ung board at kung nabasa dahil malinis MB check ko ung line ng backlight kung shorted na test ko na shorted pla ung fl2024 sa GND dahilan kung bakit walang ilaw ang unit kaya niremove...

pa pm ng pass sir salamat

sir salamat sa pass kaso bigo ung sakin white screen parin... buti nlang nakuha paliwanagan ung 2mer.

boss pa share nman ng firmware mo.

new link wala ng decrytion key https://mega.nz/#!X51iyZRY!QpsR8lCFe6Tmew7vIILYwpG41yQyyhcpAjn2tHH8Y2s

boss pa pashare nman ng pass

boss pa pm naman ng pass may gawa kc aq ngaun salamat.

boss ayaw tlaga dalawang besses ko nang nadaload ung file pero parehas ayaw ma extract

sir may error sa extracting dalawang besese aq nag DL ganun parin sir ito ung error sir

Direct Unlock Remove SD and SIM cards from the phone; Connect powered-on phone to PC with Micro USB cable; Install necessary driver; Click "Unlock" button; Follow software instructions (prompts). Note: To connect the phone in Normal Mode, do the next: Go to "Settings -> PC connection ->...

Default samsung g530h unlock done! UNLOCK INSTRUCTIONS: Micro-USB cable: 1. Phone must be powered on. 2. Type *#0808# and select "DM+MODEM+ADB". 3. Type *#9090# and choose "DM/DUN over HSIC". 4. Reboot phone. 5. Connect USB cable, install drivers if needed. 6. Select Samsung...

procedure open sp flash tool select scaterfile select download remove battery at ibalik sa unit insert usb cable wait to finish

open sigma exe click mtk click imei turn ang unit insert usb install driver select port repair imei

n7100 note ll unlock done!. root using kingo root samsung n7100 note ll unlock by z3x n7100 kitkat version 4.4.2 status lock sa globe need unlock nag try aq sa bagong update may error kaya ginamit ko ung luma open z3x tools 18.1 select model n7100 enable usb debugging...

salamat boss laking tulong 2 mabuhay ka sir

LG P970 password done. open octopus software. go to lg infineon . i select gs 102 uselect box comport and do factory reset... all done .

open sigma exe selct mtk click calculator enter imei/pid calculate unlock code

lg-t500 hang naka tulala lang open lgtool select model load firmware flash

gt-e1200m hang done open z3x 2g select model input firmware flash

open volcano exe select spd/ boot 6531a read fhash click unlock code firmware http://www.4shared.com/rar/mtVAzztbce/CM_C13_20150620_161030_FullFla.html

Cherry mobile Snap TMPA done sa dragon 1.set comport to USB 2.uncheck pin out 3.select spd 4.select format 5.select mobile option to 8810_android 6.check format_userdata only 7.tick start and wait to finish

ot 7040 hang open nck android module select model tick scat file load scatter flash

UNLOCK INSTRUCTIONS: Micro-USB cable: 1. Phone must be powered on. 2. Type *#0808# and select "DM+MODEM+ADB". 3. Type *#9090# and choose "DM/DUN over HSIC". 4. Reboot phone. 5. Connect USB cable, install drivers if needed. 6. Select Samsung diagnostic port in port settings. 7. Press...

UNLOCK INSTRUCTIONS: Micro-USB cable: 1. Phone must be powered on. 2. Type *#0808# and select "DM+MODEM+ADB". 3. Type *#9090# and choose "DM/DUN over HSIC". 4. Reboot phone. 5. Connect USB cable, install drivers if needed. 6. Select Samsung diagnostic port in port...