2 pcs i9500 4.4.2 unlock done
Tools
z3x samsung box
usb cable
procedure
you need to root
Required Files:
http://www.4shared.com/rar/tryvgRlNce/Rooting_tools.html
Step 1 – Extract the CF-Auto-Root Package zip file.
Step 2 – Switch OFF your phone. Press and hold the Volume Down + Home buttons together, and then press the Power button till you see the construction Android robot and a triangle. Press Power again to confirm to enter into Download Mode.
Step 3 – Open ODIN on your computer. Connect your phone to your computer while your phone is in the Download Mode.
Step 4 – If your phone is connected successfully, one of the ID:COM boxes will change color with the COM port number as shown in the picture below. This step might take some time.
Odin-307
Step 5 – Now select the file that you have to flash/install on your phone. This file will be found from the extracted file in Step 1.
Click on ‘PDA’ and select the file ‘CF-Auto-Root-ja3g-ja3gxx-gti9500.zip‘.
Step 6 – In ODIN, check the Auto Reboot and F. Reset Time options, if not already.
Step 7 – Now click on the Start button in ODIN. Installation process will start and would take a few minutes to complete.
Step 8 – After the installation is completed, your phone will reboot into Recovery Mode automatically and install the root package / files. Your ID:COM box will also turn green.
Step 9 – After you see the home screen, unplug your phone from the computer.
NOTE: Sometimes the device does NOT boot into Recovery Mode automatically and root your device. If that happens, do the entire procedure again.
Now proceed to Unlocking
Open Z3x
select correct model
thick unlock
DOne
salamat po...8->
Tools
z3x samsung box
usb cable
procedure
you need to root
Required Files:
http://www.4shared.com/rar/tryvgRlNce/Rooting_tools.html
Step 1 – Extract the CF-Auto-Root Package zip file.
Step 2 – Switch OFF your phone. Press and hold the Volume Down + Home buttons together, and then press the Power button till you see the construction Android robot and a triangle. Press Power again to confirm to enter into Download Mode.
Step 3 – Open ODIN on your computer. Connect your phone to your computer while your phone is in the Download Mode.
Step 4 – If your phone is connected successfully, one of the ID:COM boxes will change color with the COM port number as shown in the picture below. This step might take some time.
Odin-307
Step 5 – Now select the file that you have to flash/install on your phone. This file will be found from the extracted file in Step 1.
Click on ‘PDA’ and select the file ‘CF-Auto-Root-ja3g-ja3gxx-gti9500.zip‘.
Step 6 – In ODIN, check the Auto Reboot and F. Reset Time options, if not already.
Step 7 – Now click on the Start button in ODIN. Installation process will start and would take a few minutes to complete.
Step 8 – After the installation is completed, your phone will reboot into Recovery Mode automatically and install the root package / files. Your ID:COM box will also turn green.
Step 9 – After you see the home screen, unplug your phone from the computer.
NOTE: Sometimes the device does NOT boot into Recovery Mode automatically and root your device. If that happens, do the entire procedure again.
Now proceed to Unlocking
Open Z3x
select correct model
thick unlock
DOne
salamat po...8->
