j_car09
Registered
6120c unlock done!![Reference]
bwenumano 6120c unlock done
Handling device: [Cyclone Team], [Cyclone Bootloader], [Platform: Classic]
Handling device: [Cyclone Team], [Cyclone Box], [Platform: Classic]
Initializing box...
Box Firmware: Cyclone Nokia/Blackberry Application v01.82, (Nov 12 2011 09:45:38, gcc v4.3.3, RTOS V6.0.1), Type: Signed Production Application, (C) KarwosSoft 2011
Hardware Platform: Cyclone Classic Flasher Interface (c) 2008,2009 KarwosLabs
Box Serial Number: mharginex
HW Revision: A, Suitable for: Production, Case: First Plastic Case, MCU Manufacture Time: 2009, wk40
Initializing security card...
Card Serial Number: mharginex
Card Firmware Revision: 0109
Card is activated
Box is activated
Started box selftests procedure
USB Voltage 4.85v PASSED
MCU Voltage 3.30v PASSED
Core Voltage 1.80v PASSED
VBAT Voltage 0.01v PASSED
VBAT Voltage 4.77v PASSED
Box VPP disabled
VPP Voltage 0.02v PASSED
Internal Box VPP Enabled
VPP Voltage 4.75v PASSED
Box VPP disabled
VPP Voltage 0.04v PASSED
External Box VPP Enabled
VPP Voltage 0.04v FAILED - IGNORED - Probably power supply is not connected
Box VPP disabled
All box selftests passed!
Super DCT4 Activation: TRUE
XGold/Blackberry Service Running, Credits Left: 100
Avaiable Physical Memory: 485.672MB
Avaiable Virtual Memory: 1.495GB
Avaiable Pagefile: 1.1010GB
Initializing FBUS...
All initialized - Ready to work
Booting CMT...
CMT_SYSTEM_ASIC_ID: 000000010000022600010006400C192101021103
CMT_EM_ASIC_ID: 00000295
CMT_EM_ASIC_ID: 00000B22
CMT_PUBLIC_ID: 20000105187E00583895400A887E63F5FAECDCC2
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE
CMT_BOOT_ROM_CRC: A8C1D671
CMT_SECURE_ROM_CRC: 3E691FF8
CMT Ready!
Searching for BootCode: DualLine 32Bit
RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 512.11.24.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Using NEW BB5 FLASHING PROTOCOL
Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
If software STUCK HERE with box TX LED lit, that means:
1. You have not attached yellow TX2 Adapter (IT IS REQUIRED FOR BB5 PHONES WHEN USING JAF/UFS CABLES!)
2. Your cable is not TX2 Enabled!
3. Transmission error occured, try again
In either cases, you need to reconnect your box from USB.
FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
FlashChip[0,CMT]: 0x0400000000000000, Unknown, NOR
FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR
FlashChip[0,CMT]: 0x00EC003000000121, Samsung, ONENAND
Requested Algorithm: XSR 1.5 (CMT)
Searching for BootCode: DualLine 32Bit
FlashChip 0x00EC0030 (Samsung), Size: 128MBytes, VPP: Not Supported
RAPIDOv11_XSR15_alg.fg, Type: Algorithm, Rev: 512.11.24.0, Algo: XSR 1.5
Initializing TurboCache...
TurboCache Loaded!
Writing CMT PASUBTOC Certificate...
Writing CMT ALG Certificate...
CMT Algorithm Ready!
Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Adding FUR Client (CMT, State: Ready)...
CMT FUR Ready!
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 0FE1BA92D924A658E4800780FA6F4868100AC947
APE Boot skipped on user request
Flashbus Write baud set to 5.0Mbits
Restarting MCU...
MCU Version V 03.83
MCU Date 18-06-07
Product RM-243 (Nokia 6120 classic)
Manufacturer (c) Nokia
IMEI 359807010305102
Mastercode 342136725
IMEI Spare 3A95080701031500
IMEI SV 3395080701031510F7000000
PPM 03.83j(#rofs_version_inforofx_version_infok rm243_ENO_x_2007wk24v0.01n256o256
PSN MIH675779
Product Code 0554672
Basic Product Code 0548116
PSD 0000000000000000
LPSN 0
APE SW 03.83
APE Variant rofs_version_inforofx_version_info
APE Test rm243_ENO_x_2007wk24v0.01
APE HW 256
APE ADSP 256
RETU 15
TAHVO 22
AHNE 11
HW 0801i03.83j(#rofs_version_inforofx_version_infok rm243_ENO_x_2007wk24v0.01n256o256
PCI i03.83j(#rofs_version_inforofx_version_infok rm243_ENO_x_2007wk24v0.01n256o256
UEM 03.83j(#rofs_version_inforofx_version_infok rm243_ENO_x_2007wk24v0.01n256o256
UPP 03.83j(#rofs_version_inforofx_version_infok rm243_ENO_x_2007wk24v0.01n256o256
RFIC 17141714
DSP pb06w41v34.3_rm243
LCD 03.83j(#rofs_version_inforofx_version_infok rm243_ENO_x_2007wk24v0.01n256o256
BT 03.83j(#rofs_version_inforofx_version_infok rm243_ENO_x_2007wk24v0.01n256o256
ADSP Sw 03.83j(#rofs_version_inforofx_version_infok rm243_ENO_x_2007wk24v0.01n256o256
ADSP DevID 03.83j(#rofs_version_inforofx_version_infok rm243_ENO_x_2007wk24v0.01n256o256
ADSP RevID 03.83j(#rofs_version_inforofx_version_infok rm243_ENO_x_2007wk24v0.01n256o256
AEM 03.83j(#rofs_version_inforofx_version_infok rm243_ENO_x_2007wk24v0.01n256o256
Flip MCUSW 03.83j(#rofs_version_inforofx_version_infok rm243_ENO_x_2007wk24v0.01n256o256
Simlock Server SIMLOCK SERVER
Simlock Key 5150300000000000
Simlock Profile 0000000000000000
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Simlock [1,1] State: CLOSED Type: MCC-MNC Data: 51503F
Simlock [2,1] State: CLOSED Type: MCC-MNC Data: 51503F
Auto Selecting Flash Files on User Request...
Product Code: 0554672
No Flash Datapackage installed for this Phone!
BB5 Unlock Started...
MCU Version V 03.83
MCU Date 18-06-07
Product RM-243 (Nokia 6120 classic)
Manufacturer (c) Nokia
IMEI 359807010305102
Mastercode 342136725
Simlock Server SIMLOCK SERVER
Simlock Key 5150300000000000
Simlock Profile 0000000000000000
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Simlock [1,1] State: CLOSED Type: MCC-MNC Data: 51503F
Simlock [2,1] State: CLOSED Type: MCC-MNC Data: 51503F
Reading Security Block...
Security block OK and saved to "RM-243_359807010305105_1292011_31310 AM.SecurityBlock.PM"
WARNING: "20000105187E00583895400A887E63F5FAECDCC2.C000336C " Not Exists, Will read it...
Reading CYC file from phone...
Booting CMT...
CMT_SYSTEM_ASIC_ID: 000000010000022600010006400C192101021103
CMT_EM_ASIC_ID: 00000295
CMT_EM_ASIC_ID: 00000B22
CMT_PUBLIC_ID: 20000105187E00583895400A887E63F5FAECDCC2
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE
CMT_BOOT_ROM_CRC: A8C1D671
CMT_SECURE_ROM_CRC: 3E691FF8
CMT Ready!
New_RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 512.11.16.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Using NEW BB5 FLASHING PROTOCOL
Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
If software STUCK HERE with box TX LED lit, that means:
1. You have not attached yellow TX2 Adapter (IT IS REQUIRED FOR BB5 PHONES WHEN USING JAF/UFS CABLES!)
2. Your cable is not TX2 Enabled!
3. Transmission error occured, try again
In either cases, you need to reconnect your box from USB.
FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
FlashChip[0,CMT]: 0x0400000000000000, Unknown, NOR
FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR
FlashChip[0,CMT]: 0x00EC003000000121, Samsung, ONENAND
Requested Algorithm: XSR 1.5 (CMT)
Sending Auxiliary Loader...
Auxiliary Loader Sent!
If software STUCK HERE with box TX LED lit, that means:
1. You have not attached yellow TX2 Adapter (IT IS REQUIRED FOR BB5 PHONES WHEN USING JAF/UFS CABLES!)
2. Your cable is not TX2 Enabled!
3. Transmission error occured, try again
In either cases, you need to reconnect your box from USB.
Loader: RAPxx CommonBoot v1.06 (C) 2011 KarwosLabs
Custom loader running OK! Working...
Readed OK, Saving to "20000105187E00583895400A887E63F5FAECDCC2.C000336C "
Checking for Rootkey Hash support with selected Unlock Method...
Selected Unlock Method: RPL Calculation
Asking box to calculate RPL...
Received RPL from Box OK!
Writing Simlock...
Simlock ACCEPTED OK !
Handling device: [Cyclone Team], [Cyclone Bootloader], [Platform: Classic]
Handling device: [Cyclone Team], [Cyclone Box], [Platform: Classic]
Initializing box...
Box Firmware: Cyclone Nokia/Blackberry Application v01.82, (Nov 12 2011 09:45:38, gcc v4.3.3, RTOS V6.0.1), Type: Signed Production Application, (C) KarwosSoft 2011
Hardware Platform: Cyclone Classic Flasher Interface (c) 2008,2009 KarwosLabs
Box Serial Number: mharginex
HW Revision: A, Suitable for: Production, Case: First Plastic Case, MCU Manufacture Time: 2009, wk40
Initializing security card...
Card Serial Number: mharginex
Card Firmware Revision: 0109
Card is activated
Box is activated
Started box selftests procedure
USB Voltage 4.85v PASSED
MCU Voltage 3.30v PASSED
Core Voltage 1.80v PASSED
VBAT Voltage 0.01v PASSED
VBAT Voltage 4.77v PASSED
Box VPP disabled
VPP Voltage 0.02v PASSED
Internal Box VPP Enabled
VPP Voltage 4.75v PASSED
Box VPP disabled
VPP Voltage 0.04v PASSED
External Box VPP Enabled
VPP Voltage 0.04v FAILED - IGNORED - Probably power supply is not connected
Box VPP disabled
All box selftests passed!
Super DCT4 Activation: TRUE
XGold/Blackberry Service Running, Credits Left: 100
Avaiable Physical Memory: 485.672MB
Avaiable Virtual Memory: 1.495GB
Avaiable Pagefile: 1.1010GB
Initializing FBUS...
All initialized - Ready to work
Booting CMT...
CMT_SYSTEM_ASIC_ID: 000000010000022600010006400C192101021103
CMT_EM_ASIC_ID: 00000295
CMT_EM_ASIC_ID: 00000B22
CMT_PUBLIC_ID: 20000105187E00583895400A887E63F5FAECDCC2
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE
CMT_BOOT_ROM_CRC: A8C1D671
CMT_SECURE_ROM_CRC: 3E691FF8
CMT Ready!
Searching for BootCode: DualLine 32Bit
RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 512.11.24.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Using NEW BB5 FLASHING PROTOCOL
Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
If software STUCK HERE with box TX LED lit, that means:
1. You have not attached yellow TX2 Adapter (IT IS REQUIRED FOR BB5 PHONES WHEN USING JAF/UFS CABLES!)
2. Your cable is not TX2 Enabled!
3. Transmission error occured, try again
In either cases, you need to reconnect your box from USB.
FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
FlashChip[0,CMT]: 0x0400000000000000, Unknown, NOR
FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR
FlashChip[0,CMT]: 0x00EC003000000121, Samsung, ONENAND
Requested Algorithm: XSR 1.5 (CMT)
Searching for BootCode: DualLine 32Bit
FlashChip 0x00EC0030 (Samsung), Size: 128MBytes, VPP: Not Supported
RAPIDOv11_XSR15_alg.fg, Type: Algorithm, Rev: 512.11.24.0, Algo: XSR 1.5
Initializing TurboCache...
TurboCache Loaded!
Writing CMT PASUBTOC Certificate...
Writing CMT ALG Certificate...
CMT Algorithm Ready!
Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Adding FUR Client (CMT, State: Ready)...
CMT FUR Ready!
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 0FE1BA92D924A658E4800780FA6F4868100AC947
APE Boot skipped on user request
Flashbus Write baud set to 5.0Mbits
Restarting MCU...
MCU Version V 03.83
MCU Date 18-06-07
Product RM-243 (Nokia 6120 classic)
Manufacturer (c) Nokia
IMEI 359807010305102
Mastercode 342136725
IMEI Spare 3A95080701031500
IMEI SV 3395080701031510F7000000
PPM 03.83j(#rofs_version_inforofx_version_infok rm243_ENO_x_2007wk24v0.01n256o256
PSN MIH675779
Product Code 0554672
Basic Product Code 0548116
PSD 0000000000000000
LPSN 0
APE SW 03.83
APE Variant rofs_version_inforofx_version_info
APE Test rm243_ENO_x_2007wk24v0.01
APE HW 256
APE ADSP 256
RETU 15
TAHVO 22
AHNE 11
HW 0801i03.83j(#rofs_version_inforofx_version_infok rm243_ENO_x_2007wk24v0.01n256o256
PCI i03.83j(#rofs_version_inforofx_version_infok rm243_ENO_x_2007wk24v0.01n256o256
UEM 03.83j(#rofs_version_inforofx_version_infok rm243_ENO_x_2007wk24v0.01n256o256
UPP 03.83j(#rofs_version_inforofx_version_infok rm243_ENO_x_2007wk24v0.01n256o256
RFIC 17141714
DSP pb06w41v34.3_rm243
LCD 03.83j(#rofs_version_inforofx_version_infok rm243_ENO_x_2007wk24v0.01n256o256
BT 03.83j(#rofs_version_inforofx_version_infok rm243_ENO_x_2007wk24v0.01n256o256
ADSP Sw 03.83j(#rofs_version_inforofx_version_infok rm243_ENO_x_2007wk24v0.01n256o256
ADSP DevID 03.83j(#rofs_version_inforofx_version_infok rm243_ENO_x_2007wk24v0.01n256o256
ADSP RevID 03.83j(#rofs_version_inforofx_version_infok rm243_ENO_x_2007wk24v0.01n256o256
AEM 03.83j(#rofs_version_inforofx_version_infok rm243_ENO_x_2007wk24v0.01n256o256
Flip MCUSW 03.83j(#rofs_version_inforofx_version_infok rm243_ENO_x_2007wk24v0.01n256o256
Simlock Server SIMLOCK SERVER
Simlock Key 5150300000000000
Simlock Profile 0000000000000000
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Simlock [1,1] State: CLOSED Type: MCC-MNC Data: 51503F
Simlock [2,1] State: CLOSED Type: MCC-MNC Data: 51503F
Auto Selecting Flash Files on User Request...
Product Code: 0554672
No Flash Datapackage installed for this Phone!
BB5 Unlock Started...
MCU Version V 03.83
MCU Date 18-06-07
Product RM-243 (Nokia 6120 classic)
Manufacturer (c) Nokia
IMEI 359807010305102
Mastercode 342136725
Simlock Server SIMLOCK SERVER
Simlock Key 5150300000000000
Simlock Profile 0000000000000000
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Simlock [1,1] State: CLOSED Type: MCC-MNC Data: 51503F
Simlock [2,1] State: CLOSED Type: MCC-MNC Data: 51503F
Reading Security Block...
Security block OK and saved to "RM-243_359807010305105_1292011_31310 AM.SecurityBlock.PM"
WARNING: "20000105187E00583895400A887E63F5FAECDCC2.C000336C " Not Exists, Will read it...
Reading CYC file from phone...
Booting CMT...
CMT_SYSTEM_ASIC_ID: 000000010000022600010006400C192101021103
CMT_EM_ASIC_ID: 00000295
CMT_EM_ASIC_ID: 00000B22
CMT_PUBLIC_ID: 20000105187E00583895400A887E63F5FAECDCC2
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE
CMT_BOOT_ROM_CRC: A8C1D671
CMT_SECURE_ROM_CRC: 3E691FF8
CMT Ready!
New_RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 512.11.16.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Using NEW BB5 FLASHING PROTOCOL
Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
If software STUCK HERE with box TX LED lit, that means:
1. You have not attached yellow TX2 Adapter (IT IS REQUIRED FOR BB5 PHONES WHEN USING JAF/UFS CABLES!)
2. Your cable is not TX2 Enabled!
3. Transmission error occured, try again
In either cases, you need to reconnect your box from USB.
FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
FlashChip[0,CMT]: 0x0400000000000000, Unknown, NOR
FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR
FlashChip[0,CMT]: 0x00EC003000000121, Samsung, ONENAND
Requested Algorithm: XSR 1.5 (CMT)
Sending Auxiliary Loader...
Auxiliary Loader Sent!
If software STUCK HERE with box TX LED lit, that means:
1. You have not attached yellow TX2 Adapter (IT IS REQUIRED FOR BB5 PHONES WHEN USING JAF/UFS CABLES!)
2. Your cable is not TX2 Enabled!
3. Transmission error occured, try again
In either cases, you need to reconnect your box from USB.
Loader: RAPxx CommonBoot v1.06 (C) 2011 KarwosLabs
Custom loader running OK! Working...
Readed OK, Saving to "20000105187E00583895400A887E63F5FAECDCC2.C000336C "
Checking for Rootkey Hash support with selected Unlock Method...
Selected Unlock Method: RPL Calculation
Asking box to calculate RPL...
Received RPL from Box OK!
Writing Simlock...
Simlock ACCEPTED OK !