A887 dead boot
history: lock code,,,,flashing failed= deadboot hahahhaha
toolz:
> riff box jtag
procedure:
solder wires pin out
(just make sure your wire is properly soldered)
open riff sw
choose model ( this is important)
since hindi pa supported ng Riff ang model na A887
choose t919 model
in jtag read/wirte TAB
click connect & get ID if all is well and phone is readed
go to useful plugins TAB choose QUALCOMM
follow instruction in the image
heto na ang screen shot
success!
kaso may lock code huhuhuhu
desolder na ang mga wires
this time si HWK sa flashfile at si
Z3X naman ang dadale sa flashing
toolz:
Z3X box samsung activated
e210 combo cable
must have samsung kies for drivers
and flashifile from HWK
A887 firmware torrent file here:
http://www.mediafire.com/?mb13cmbdknus2bt
screenshot
unit screen shot habang flashing
Count supported models - 260
Searching Samsung USB Flash Interface... detected (COM27)
Sending QcSblHD_cfgdata.mbn... OK
Sending MIBIB1.mbn... OK
Sending MIBIB2.mbn... OK
Sending QcSbl.mbn... OK
Sending OEMSbl.mbn... OK
Flashing BOOT Files Done (time - 00:00:05)
Wait, Reset... OK
Sending AMSS... OK
Sending RSRC1... OK
Sending RSRC2... OK
Sending FFS... OK
Flashing Done (time - 00:07:22)
Done with Samsung Tool ver 11
no more phone lock...
done
history: lock code,,,,flashing failed= deadboot hahahhaha
toolz:
> riff box jtag
procedure:
solder wires pin out
(just make sure your wire is properly soldered)
open riff sw
choose model ( this is important)
since hindi pa supported ng Riff ang model na A887
choose t919 model
in jtag read/wirte TAB
click connect & get ID if all is well and phone is readed
go to useful plugins TAB choose QUALCOMM
follow instruction in the image
heto na ang screen shot
success!
kaso may lock code huhuhuhu
desolder na ang mga wires
this time si HWK sa flashfile at si
Z3X naman ang dadale sa flashing
toolz:
Z3X box samsung activated
e210 combo cable
must have samsung kies for drivers
and flashifile from HWK
A887 firmware torrent file here:
http://www.mediafire.com/?mb13cmbdknus2bt
screenshot
unit screen shot habang flashing
Count supported models - 260
Searching Samsung USB Flash Interface... detected (COM27)
Sending QcSblHD_cfgdata.mbn... OK
Sending MIBIB1.mbn... OK
Sending MIBIB2.mbn... OK
Sending QcSbl.mbn... OK
Sending OEMSbl.mbn... OK
Flashing BOOT Files Done (time - 00:00:05)
Wait, Reset... OK
Sending AMSS... OK
Sending RSRC1... OK
Sending RSRC2... OK
Sending FFS... OK
Flashing Done (time - 00:07:22)
Done with Samsung Tool ver 11
no more phone lock...
done