REFERENCE Acer Iconia A1-810 Bootloop, Erasing Loop, 100% Done

[JheTech]

https://mega.nz/#!BHgCFI5b!OE-8e09G6u18WnGlYLtc4_NqebKw3BtEpe0gixAVO9A

Acer Iconia A1-810
Issue: Erasing loop

Step
Unlock First Bootloader follow the procedure....
1. Download File in Link medyo malaki Compile ko na kasi lahat ng files (3GB)
2. Run "SPFT flash_tool.exe".
3. Download the scatter from "/ 810 Unlocking and CWM /".
3.1 If the Rescue folder is used, then download the scatter from "/ Rescue /".
4. Click Window → Write Memory. Another tab will appear, open it.
5. Click on "Open RAW Data ...", select "/ 810 Unlocking and CWM / secuoff.img".
6. Memory type: EMMC.
7. Start Address: 0x3D80000
8. Container Length = 0x006D20
9. Click "Write Memory".
10. Connect the switched off tablet to the PC.
11. The progress bar will be filled first with red, then purple, then gray-green.
12. Upon completion, you will see a green circle.
13. Disconnect the cable. DO NOT TRY to turn on the tablet!
14. Go to the "Download" tab.
15. Check the files:
PRELOADER "/ 810 Unlocking and CWM / preloader_unlock.bin"
RECOVERY "/ 810 Unlocking and CWM / recovery.img"
If you use the Rescue folder:
PRELOADER "/ 810 Rescue / preloader.bin"
RECOVERY "/ 810 Rescue / recovery.img "
SEC_RO" / 810 Rescue / secro.
16. Click "Download" and connect the tablet to the PC.
17. The progress bar will be filled first with red, then purple, then yellow.
18. Upon completion, you will see a green circle.
19. Disconnect the cable, wait 5 seconds and try to turn on the tablet!
19.1 If everything started up normally, then try to log into CWM.
19.2 If the tablet does not respond to the Power button, then read Instruction # 3 using the Rescue folder.
19.2.1 If the tablet does not turn on after using the Rescue folder just flash the unit using spft file


-SPFT recovery also included in file link.

password : Slipknot123!
hit like button lang po!!!!!

 

[brandon]

https://mega.nz/#!BHgCFI5b!OE-8e09G6u18WnGlYLtc4_NqebKw3BtEpe0gixAVO9A

Acer Iconia A1-810
Issue: Erasing loop

Step
Unlock First Bootloader follow the procedure....
1. Download File in Link medyo malaki Compile ko na kasi lahat ng files (3GB)
2. Run "SPFT flash_tool.exe".
3. Download the scatter from "/ 810 Unlocking and CWM /".
3.1 If the Rescue folder is used, then download the scatter from "/ Rescue /".
4. Click Window → Write Memory. Another tab will appear, open it.
5. Click on "Open RAW Data ...", select "/ 810 Unlocking and CWM / secuoff.img".
6. Memory type: EMMC.
7. Start Address: 0x3D80000
8. Container Length = 0x006D20
9. Click "Write Memory".
10. Connect the switched off tablet to the PC.
11. The progress bar will be filled first with red, then purple, then gray-green.
12. Upon completion, you will see a green circle.
13. Disconnect the cable. DO NOT TRY to turn on the tablet!
14. Go to the "Download" tab.
15. Check the files:
PRELOADER "/ 810 Unlocking and CWM / preloader_unlock.bin"
RECOVERY "/ 810 Unlocking and CWM / recovery.img"
If you use the Rescue folder:
PRELOADER "/ 810 Rescue / preloader.bin"
RECOVERY "/ 810 Rescue / recovery.img "
SEC_RO" / 810 Rescue / secro.
16. Click "Download" and connect the tablet to the PC.
17. The progress bar will be filled first with red, then purple, then yellow.
18. Upon completion, you will see a green circle.
19. Disconnect the cable, wait 5 seconds and try to turn on the tablet!
19.1 If everything started up normally, then try to log into CWM.
19.2 If the tablet does not respond to the Power button, then read Instruction # 3 using the Rescue folder.
19.2.1 If the tablet does not turn on after using the Rescue folder just flash the unit using spft file


-SPFT recovery also included in file link.

password : Slipknot123!
hit like button lang po!!!!!

 

[brandon]

sir may tanggap ako sinubukan ko kaso ay error?nagpalit na po ako flash tools..

 

[brandon]