REFERENCE Alcatel 60540 Unlock done

[intoy]

Procedure:
Unlock OK alcatel 60450 - Cricket Usa
enable diag with code ###2324#


Open Qcom tab
Select your model in the right “Phone modelâ€￾ drop-down list
Install required drivers
Power off the phone
Connect your phone to PC with USB cable
Wait up to 30 seconds while the diagnostic port appears (your phone will be in charging mode).
If diagnostic port is not detected, power the phone ON and activate it by dialing ##2324#. Then select diag port in the ports tab.
Diagnostic mode activation: dial *#2618# or ###2324#


Connecting...Phone not found
--------- 2018-09-11 20:56:05 ---------
SigmaKey 2.29.00b1 Qcom: Direct unlock
Phone model: OT-60450
Connecting...Cancelled
--------- 2018-09-11 20:57:26 ---------
SigmaKey 2.29.00b1 Qcom: Direct unlock
Android HS-USB NMEA AF02 (COM67), Provider: TCL, Driver ver.: 6.0.0.0, Date: 8/7/2014, USB\VID_1BBB&PID_AF02&REV_0225&MI_03
Phone model: OT-60450
Error writing to serial port
--------- 2018-09-11 20:58:32 ---------
SigmaKey 2.29.00b1 Qcom: Get unlock codes
Android HS-USB NMEA AF02 (COM67), Provider: TCL, Driver ver.: 6.0.0.0, Date: 8/7/2014, USB\VID_1BBB&PID_AF02&REV_0225&MI_03
Phone model: OT-60450
Error writing to serial port
--------- 2018-09-11 20:59:45 ---------
SigmaKey 2.29.00b1 Qcom: Direct unlock
Android HS-USB Diagnostics AF02 (COM68), Provider: TCL, Driver ver.: 6.0.0.0, Date: 8/7/2014, USB\VID_1BBB&PID_AF02&REV_0225&MI_00
Phone model: OT-60450
Baseband Processor: 8936
Detecting flash...eMMC, Flash size: 14.56 Gb
Hardware IMEI: 014497000018483
Reading security block...X7S3ZA70BG00
Security area saved to "C:\Users\rannis\Documents\SigmaKey\security backup\0352988386\014497000018483_8936_eMMC_X7S3ZA70BG00.skb"
Removing firmware protection....OK
Unlocking phone....Done