REFERENCE Alcatel c825 Strane one done!! (Reference)

[BLIND]

Alcatel c825 Strane one done!! (Reference)

Ang kulit.. ayaw maformat..

after trying sa pitong flashifile sa support..

sa pang 8 nadale haha.. tyagaan lang..



flash lang ng main firmware..
C825X-2BALRU1_XB27BN52_JRD26_06A_PCB01_GPRS_MT6226M_S02. MAUI_06A_W06_28_MP_V45_2007-05-08_simfree_En_De_Ru_Bg_Ua.B0M

logs ng flashing..

COM1 [Serial0] selected
Device: Alcatel OT-C825X, OT-C825A
Checking data, wait...
advanced flash detection enabled
Action: write NOR flash
"smart write" active
"format ffs" active
write: Firmware
skip: Customization/Language Pack
skip: Customization
skip: Eeprom/ffs
Boot...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing[6219:8B03:8B02]...
CPU: MT6219
CPU: MT6226MA detected
chip: 0031:73BB:A000
boot step size: 0400
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: 01227E223C2200:2AEA0000000000
flash: Amd AMD/Fujitsu std [D 0004x010000 007Ex040000 0004x010000] 32Mb
number of flash chip/regions detected: 01/01
Initialize Done
Set baud...
115200
Set baud Done
Initialize bootcode...
Initialize bootcode Done
Check firmware integrity...
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [enhanced] generation
security area#1 is Ok
security area#1 backup saved: C:\Program

Files\InfinityBox\MModule\backup_security\id.BA51E 48C.[JRD26_06A_PCB01_GPRS_MT6226M_S02.MAUI_06A_

W06_28_MP_V45.BIN_D0340F61].rpl
identification#1 detection finished
device-id: BA51E48C
identification#1 protocol ver: 05
ver. sw1: JRD26_06A_PCB01_GPRS_MT6226M_S02.MAUI_06A_W06_28_M P_V45.BIN
ver. sw2: MAUI.06A.W06.28.MP.V45, 9EF0CB2F
ffs offset/size: 01000000/01000000
detect device identification#2...
detection phase #1...
detect device identification#2 finished
Check firmware integrity Done
Check firmware content...
Check firmware content Done
Backup required data...
Backup required data Done
Patch required data...
Patch required data Done
Special operation...
Special operation Done
Write...
security area#1 calculation...
done
file saved: C:\Program

Files\InfinityBox\MModule\backup_system_log_BA51E4 8C_JRD26_06A_PCB01_GPRS_MT6226M_S02.MAUI_06A_W0

6_28_MP_V45.BIN_D0340F61_20080902-093400.B0X.bin
Area: Firmware
flash: 01227E223C2200:2AEA0000000000
Write: Firmware
detect device identification#2...
detection phase #1...
detect device identification#2 finished
security area#3 calculation...
customization: CB27BN52
done
flash: 01227E223C2200:2AEA0000000000
flash: 01227E223C2200:2AEA0000000000
Write: security area#3
security area#3 calculation done
security area#2 calculation...
..................done
flash: 01227E223C2200:2AEA0000000000
flash: 01227E223C2200:2AEA0000000000
Write: security area#2
security area#2 calculation done
Write Done
Finalization...
formatting...
flash: 01227E223C2200:2AEA0000000000
Finalization Done
file saved: C:\Program

Files\InfinityBox\MModule\backup_system_log_BA51E4 8C_JRD26_06A_PCB01_GPRS_MT6226M_S02.MAUI_06A_W0

6_28_MP_V45.BIN_D0340F61_20080902-100617.B0X.bin
Finished, time used: 1979 sec
Remove/Install battery now !

File system has been modified !
It is need to press and HOLD phone "Power" button
during long time (up to 1 min) to make phone Powered-On !