alcatel ELLE-N3 hang done by INFINITY

[BLIND]

alcatel ELLE-N3 hang done by INFINITY

eto logs... fullflash lang po mga amo..

COM8 [VCP0] selected
Device: Alcatel-Elle-N3
Checking data, wait...
advanced flash detection enabled
Action: write NOR flash
"smart write" active
"format ffs" active
write: Firmware
skip: Customization/Language Pack
skip: Customization
skip: Eeprom/ffs
Boot...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing[6219:8B03:8B02]...
CPU: MT6219
CPU: MT6226MA detected
chip: 0031:ADEC:A000
boot step size: 0400
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: 01227E223C2200:2AEA0000000000
flash: Amd AMD/Fujitsu std [D 0004x010000 007Ex040000 0004x010000] 32Mb
number of flash chip/regions detected: 01/01
Initialize Done
Set baud...
slowest
Set baud Done
Initialize bootcode...
Initialize bootcode Done
Check firmware integrity...
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [enhanced] generation
security area (code #1) is Ok
security area (code #1) backup saved: C:\Program Files\InfinityBox\MModule\backup_security\id.482F0 1B1.[JRD26_06A_PCB01_GPRS_MT6226M_S02.MAUI_06A_W06_28_M P_V45.BIN_44DDC84B].rpl
====================
New firmware detected:
JRD26_06A_PCB01_GPRS_MT6226M_S02.MAUI_06A_W06_28_M P_V45.BIN

- make "Read full flash" operation
- send "system_log_..." file to support: mt62xx@gmail.com
- send flash backup file(s) to support: mt62xx@gmail.com
- include in your e-mail full text from phone back label (phone name etc.)
====================
identification#1 detection finished
device-id: 482F01B1
identification#1 protocol ver: 05
ver. sw1: JRD26_06A_PCB01_GPRS_MT6226M_S02.MAUI_06A_W06_28_M P_V45.BIN
ver. sw2: MAUI.06A.W06.28.MP.V45, B43722BB
ffs offset/size: 01000000/01000000
detect device identification#2...
detection phase #1...
detect device identification#2 finished
Check firmware integrity Done
Check firmware content...
Check firmware content Done
Backup required data...
original imei: 35544201039376
Backup required data Done
Patch required data...
Patch required data Done
Special operation...
Special operation Done
Write...
security area (code #1) calculation...
done
file saved: C:\Program Files\InfinityBox\MModule\backup_security\system_l og_482F01B1_JRD26_06A_PCB01_GPRS_MT6226M_S02.MAUI_ 06A_W06_28_MP_V45.BIN_44DDC84B_20081201-180226.B0X.bin
Area: Firmware
flash: 01227E223C2200:2AEA0000000000
Write: Firmware
detect device identification#2...
detection phase #1...
detect device identification#2 finished
security area#3 calculation...
customization: CB27VJ57
customization area adjusted: CB27VJ57
done
flash: 01227E223C2200:2AEA0000000000
flash: 01227E223C2200:2AEA0000000000
Write: security area#3
security area#3 calculation done
security area#2 calculation...
use default security area#2 pattern
..................done
flash: 01227E223C2200:2AEA0000000000
flash: 01227E223C2200:2AEA0000000000
Write: security area#2
security area#2 calculation done
Write Done
Finalization...
formatting...
flash: 01227E223C2200:2AEA0000000000
Finalization Done
file saved: C:\Program Files\InfinityBox\MModule\backup_security\system_l og_482F01B1_JRD26_06A_PCB01_GPRS_MT6226M_S02.MAUI_ 06A_W06_28_MP_V45.BIN_44DDC84B_20081201-183124.B0X.bin
Finished, time used: 1778 sec
Remove/Install battery now !

File system has been modified !
It is need to press and HOLD phone "Power" button
during long time (up to 1 min) to make phone Powered-On !