Alcatel Pixi 8050E NCKBack Up By ANTGSMWinsam
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : PreLoader USB VCOM (Android) (COM6)
Boot mode: Preloader
BBCHIP: 6580 0 ca00
Using Algo 1.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6580
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (58Gb+8192Mb) TOSIBA 0x303038473730
EMMC FW VERSION: 00:00:00:00:00:00:00:00
EMMC CID: 110100303038473730 : 00000000000000
EMMC UA SIZE: 0x1d2000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1d2c00000 [7.293 GB]
-Reading GPT Drive OK
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM Port (COM5)
Build ID: LMY47I
Display ID: LMY47I release-keys
Version: 5.1
Build Date: Tue Jul 26 14:27:56 CST 2016
Model: 8050E
Brand: TCL
Device: Pixi4-6_3G
Manufacturer: TCL
Region: US
Mediatek Version Release: ALPS.L1.MP6.V2.17_TCL8321.EMMC_P49
Dumping Preloader.
Start dumping flash, this can take up to 1 hour.......
Start processing proinfo
Reading: BEGIN: 0x80000 - LEN: 0x300000
Start processing nvram
Start processing protect1 ......
Reading: BEGIN: 0x880000 - LEN: 0xa00000
Start processing protect2 ......
Reading: BEGIN: 0x1280000 - LEN: 0xa00000
Start processing lk ......
Start processing boot
Start processing recovery
Start processing logo ......
Start processing custpack
Reading: BEGIN: 0x45a0000 - LEN: 0x3e800000
Start processing frp ......
Reading: BEGIN: 0x437a0000 - LEN: 0x100000
Start processing nvdata ......
Reading: BEGIN: 0x438a0000 - LEN: 0x2000000
Start processing secro
Reading: BEGIN: 0x48200000 - LEN: 0x800000
Start processing system
Reading: BEGIN: 0x49800000 - LEN: 0x60000000
Saved to : C:\Users\ZAYN\Documents\Android_MTK\firmware_backup\MT6580_EMMC_TCL_8050E_5_1_ALPS_L1_MP6_V2_17_TCL8321_EMMC_P49(2018_09_13_15_28)
Wait untill phone will start charging.
All done.
Firmware :>>>HERE<<<
Pass: antsokrey23
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : PreLoader USB VCOM (Android) (COM6)
Boot mode: Preloader
BBCHIP: 6580 0 ca00
Using Algo 1.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6580
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (58Gb+8192Mb) TOSIBA 0x303038473730
EMMC FW VERSION: 00:00:00:00:00:00:00:00
EMMC CID: 110100303038473730 : 00000000000000
EMMC UA SIZE: 0x1d2000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1d2c00000 [7.293 GB]
-Reading GPT Drive OK
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM Port (COM5)
Build ID: LMY47I
Display ID: LMY47I release-keys
Version: 5.1
Build Date: Tue Jul 26 14:27:56 CST 2016
Model: 8050E
Brand: TCL
Device: Pixi4-6_3G
Manufacturer: TCL
Region: US
Mediatek Version Release: ALPS.L1.MP6.V2.17_TCL8321.EMMC_P49
Dumping Preloader.
Start dumping flash, this can take up to 1 hour.......
Start processing proinfo
Reading: BEGIN: 0x80000 - LEN: 0x300000
Start processing nvram
Start processing protect1 ......
Reading: BEGIN: 0x880000 - LEN: 0xa00000
Start processing protect2 ......
Reading: BEGIN: 0x1280000 - LEN: 0xa00000
Start processing lk ......
Start processing boot
Start processing recovery
Start processing logo ......
Start processing custpack
Reading: BEGIN: 0x45a0000 - LEN: 0x3e800000
Start processing frp ......
Reading: BEGIN: 0x437a0000 - LEN: 0x100000
Start processing nvdata ......
Reading: BEGIN: 0x438a0000 - LEN: 0x2000000
Start processing secro
Reading: BEGIN: 0x48200000 - LEN: 0x800000
Start processing system
Reading: BEGIN: 0x49800000 - LEN: 0x60000000
Saved to : C:\Users\ZAYN\Documents\Android_MTK\firmware_backup\MT6580_EMMC_TCL_8050E_5_1_ALPS_L1_MP6_V2_17_TCL8321_EMMC_P49(2018_09_13_15_28)
Wait untill phone will start charging.
All done.
Firmware :>>>HERE<<<
Pass: antsokrey23
Last edited by a moderator:
