UNIT: ARNOVA TAB G2 9inch
STATUS: Blackscreen
TOOLS:
Flashtool zip:FlashTool.zip
Update.img:arnovatech.com/support/firmware/2/arnova9g2/140408/update.img
Common sense!
PROCEDURE:
Entering in « Flashing » mode!
1.Plug the USB cable into the PC (do not plug into the tablet yet)
2.The tablet must turned be off (push the reset button if available or the power button for 10 secs).
3.Press & hold Home & Menu then plug the USB lead into the tablet. Do not release the buttons before the Step “6â€
4.The computer will automatically detect your unit and install the drivers for the first time. Please wait until the next step
5.Your device will enter in “Flashing†mode, the grey square in the flashing tool should turn green
6.The Home & Menu buttons can now be released
NOTE: If your device is not recognized, unplug the USB lead from the tablet then plug it in again. If needed, restart from the beginning of Step 4.
7.LOAD THE FW: Press on the File button and browse to where you downloaded the firmware file named update.img. A message will be displayed once the firmware has loaded and the device is ready to be restored.
8.Click on “Restore†: and wait........................paksit!!!
Ito lang screenshot ko,nagmamadali kasi si tumer!!!finish product na!
For reference lang mga amo!!!salamat sa pagbisita!!!
STATUS: Blackscreen
TOOLS:
Flashtool zip:FlashTool.zip
Update.img:arnovatech.com/support/firmware/2/arnova9g2/140408/update.img
Common sense!
PROCEDURE:
Entering in « Flashing » mode!
1.Plug the USB cable into the PC (do not plug into the tablet yet)
2.The tablet must turned be off (push the reset button if available or the power button for 10 secs).
3.Press & hold Home & Menu then plug the USB lead into the tablet. Do not release the buttons before the Step “6â€
4.The computer will automatically detect your unit and install the drivers for the first time. Please wait until the next step
5.Your device will enter in “Flashing†mode, the grey square in the flashing tool should turn green
6.The Home & Menu buttons can now be released
NOTE: If your device is not recognized, unplug the USB lead from the tablet then plug it in again. If needed, restart from the beginning of Step 4.
7.LOAD THE FW: Press on the File button and browse to where you downloaded the firmware file named update.img. A message will be displayed once the firmware has loaded and the device is ready to be restored.
8.Click on “Restore†: and wait........................paksit!!!
Ito lang screenshot ko,nagmamadali kasi si tumer!!!finish product na!
For reference lang mga amo!!!salamat sa pagbisita!!!
