- Joined
- Jun 12, 2014
- Messages
- 357
BS Mobile Regent
For Bootloop/Deadboot/Hang/Damage System
Procedure:
*Open latest SP Flashtool
*Load Scatter File
*Uncheck Preloader (safety precaution)
NOTE: DO NOT FORMAT,DOWNLOAD ONLY!
*Tick Download
*Wait Until finish flashing
*Disconnect phone And Power On.
Possible Problems after Flashing Stockrom:
1.) Dead(No Power)
Solution: Flash uboot
How? : Open Sp Flastool,load scatter file,Uncheck all files EXCEPT uboot,browse
the corresponding file from the stockrom and flash.
2.) Invalid IMEI
Solution: Repair via Engineering Mode
How? : Dial *#*#3646633#*#* ,a secret menu will appear,select Connectivity Tab,CDS
Information,Radio Information. For IMEI 1,select phone 1,for IMEI 2,select phone 2.
For imei1 send this command: AT +EGMR=1,7,"your imei 1"
For Imei2 send this command: AT +EGMR=1,10,"your imei 2"
Reboot phone.
NOTE: Theres a space between "AT" and "+". But if it doesn't work,try without space.
Password???? wag mo nang itanong
Busy ako
For Bootloop/Deadboot/Hang/Damage System
Procedure:
*Open latest SP Flashtool
*Load Scatter File
*Uncheck Preloader (safety precaution)
NOTE: DO NOT FORMAT,DOWNLOAD ONLY!
*Tick Download
*Wait Until finish flashing
*Disconnect phone And Power On.
Possible Problems after Flashing Stockrom:
1.) Dead(No Power)
Solution: Flash uboot
How? : Open Sp Flastool,load scatter file,Uncheck all files EXCEPT uboot,browse
the corresponding file from the stockrom and flash.
2.) Invalid IMEI
Solution: Repair via Engineering Mode
How? : Dial *#*#3646633#*#* ,a secret menu will appear,select Connectivity Tab,CDS
Information,Radio Information. For IMEI 1,select phone 1,for IMEI 2,select phone 2.
For imei1 send this command: AT +EGMR=1,7,"your imei 1"
For Imei2 send this command: AT +EGMR=1,10,"your imei 2"
Reboot phone.
NOTE: Theres a space between "AT" and "+". But if it doesn't work,try without space.
Password???? wag mo nang itanong
Busy ako
