GS 390GO UNLOCK
Tools:
*Z3x Box (LG ACTIVATED)
*Modify Cable
Procedure:
*Open Z3x shell
*Select GS-390GO
*Connect The RX/TX
*Click (Connect)
*Click (Unlock)
*To Enter the NCK Codes Follow this Instruction
>Power phone ON with original or test SIM
>Type *#865625# to enter unlock menu
>Enter needed unlock code
Logs:
Welcome to LG Infineon SGOLD3 TOOL v2x by NoName®
Models count: 80
Current OS : Windows XP
Welcome to Sgold3 Module!!
Count supported models - 80
***Disconnected***
TIP: Please reconnect phone battery / power source.
Loading module , please wait...
PMB8877 Module 1.2 started. SW: Ver 2.2.8.0
Connecting to GS390GO in UART Mode (COM23 ,921600)
Please reconnect battery, press and hold power button...
Phone found! (MCU
MB8877) prebooting...
Release power button. Booting...
Reading info...
BOOT Stage Finished , sending authority...
Sending SEC pack...
Reading EEPROM...
Backup Saved AS:C:\Program Files\Z3X\LG\LGI_SG3\BACKUP\GS390GO_autobackup_301 22010_120400.eep
Analising EEPROM...
Phone IMEI:0121960064*****
Unlock codes:
NCK[0]: 8949065752421796 (LOCKED)
TIP: For additional codes , select Read Codes option and click Unlock button
Finished in 2 seconds
Reading EEPROM
Sending SEC pack...
Analising EEPROM...
Phone IMEI:0121960064*****
For operation finishing,do next :
1. power phone ON with original SIM
2. type 2945#*XXX# ,where XXX are model digits to enter unlock menu
3. Enter one of this code(s):
NCK[0]: 8949065752421796 (LOCKED)
NCK[1]: 3467023543101490 (NS)
NCK[2]: 4770754491055634 (SP)
NCK[3]: 9218613372715427 (CP)
Finished in 2 seconds
Finish Product:
Tools:
*Z3x Box (LG ACTIVATED)
*Modify Cable
Procedure:
*Open Z3x shell
*Select GS-390GO
*Connect The RX/TX
*Click (Connect)
*Click (Unlock)
*To Enter the NCK Codes Follow this Instruction
>Power phone ON with original or test SIM
>Type *#865625# to enter unlock menu
>Enter needed unlock code
Logs:
Welcome to LG Infineon SGOLD3 TOOL v2x by NoName®
Models count: 80
Current OS : Windows XP
Welcome to Sgold3 Module!!
Count supported models - 80
***Disconnected***
TIP: Please reconnect phone battery / power source.
Loading module , please wait...
PMB8877 Module 1.2 started. SW: Ver 2.2.8.0
Connecting to GS390GO in UART Mode (COM23 ,921600)
Please reconnect battery, press and hold power button...
Phone found! (MCU
Release power button. Booting...
Reading info...
BOOT Stage Finished , sending authority...
Sending SEC pack...
Reading EEPROM...
Backup Saved AS:C:\Program Files\Z3X\LG\LGI_SG3\BACKUP\GS390GO_autobackup_301 22010_120400.eep
Analising EEPROM...
Phone IMEI:0121960064*****
Unlock codes:
NCK[0]: 8949065752421796 (LOCKED)
TIP: For additional codes , select Read Codes option and click Unlock button
Finished in 2 seconds
Reading EEPROM
Sending SEC pack...
Analising EEPROM...
Phone IMEI:0121960064*****
For operation finishing,do next :
1. power phone ON with original SIM
2. type 2945#*XXX# ,where XXX are model digits to enter unlock menu
3. Enter one of this code(s):
NCK[0]: 8949065752421796 (LOCKED)
NCK[1]: 3467023543101490 (NS)
NCK[2]: 4770754491055634 (SP)
NCK[3]: 9218613372715427 (CP)
Finished in 2 seconds
Finish Product:
