c3-01 12345..imie done by cyclone

[soLVer_tech]

ito po sinundan ko goto BB5/security/ click auto imei recovery


[Nokia C3-01 USB Phonet]: Port opened OK!
MCU Version V 07.51
MCU Date 12-07-12
Product RM-640 (Nokia C3-00)
Manufacturer (c) Nokia
IMEI 12345610654321?
IMEI Spare 1A32541660452301
IMEI SV 1332541660452351F9000000
PPM V 07.51, 12-07-12, RM-640, (c) Nokia , T
CNT Content: t_0599598, V 07.51, 12-07-12, RM-640, (c) Nokia
PSN CWF094404
Product Code 0599598
Module Code 0204603
Basic Product Code 0596068
PSD 0000000000000000
LPSN 0
RETU 51
TAHVO 00
AHNE 11
HW 1006
RFIC |Alli_4.3.4
DSP 92_PM2_7.51
LCD TPO
BT 4217-v924
Failed to read info -> Failed to read SP info
Read info thread finished, continuing...
Post flash tasks finished!
Flashing successfully finished!
Started IMEI Recovery...
Booting CMT...
[Nokia C3-01 USB Phonet]: Port opened OK!
Switching to RAW Mode...
[Nokia USB Flashing Generic]: Port opened OK!
[Nokia USB Flashing Generic]: Port opened OK!
Old ROM Detected
CMT_SYSTEM_ASIC_ID: 000000030000022600010007600C192102031104
CMT_EM_ASIC_ID: 00001051
CMT_EM_ASIC_ID: 00001060
CMT_PUBLIC_ID: 1860000469DB0344CF8AA05C8E4441A170B33D20
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: 916F75217F32081248B15C38DFC8E81B
CMT_BOOT_ROM_CRC: E693EF0D
CMT_SECURE_ROM_CRC: AC22615B
CMT Ready!
Searching for BootCode: DualLine 32Bit
RAPUv11_2nd.fg, Type: 2nd Boot Loader, Rev: 768.12.14.0, Algo: BB5
Using NEW BB5 FLASHING PROTOCOL
Waiting for USB Boot ROM Answer...
ROM Ret: 0xFFFD125D
ROM CMT dwAddr: 0x10004FF0
ROM CMT dwLength: 0x00627837
Seems ROM Initialized OK!
Transmission Mode Requested: Control USB, Accepted: Control USB
FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
FlashChip[0,CMT]: 0x0000000000000000, Unknown, NOR
FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR
FlashChip[0,CMT]: 0x0098003000000131, Toshiba, ONENAND
Requested Algorithm: XSR 1.6 (CMT)
Searching for BootCode: DualLine 32Bit
FlashChip 0x00980030 (Toshiba), Size: 128MBytes, VPP: Not Supported
RAPUv11_XSR17_alg.fg, Type: Algorithm, Rev: 768.12.14.0, Algo: XSR 1.6
Initializing TurboCache...
TurboCache Loaded!
Writing CMT PASUBTOC Certificate...
Writing CMT ALG Certificate...
CMT Algorithm Ready!
Transmission Mode Requested: Bulk USB, Accepted: Bulk USB
Box TX2 Data Pin set to: Service Pin 3
Waiting for FUR Client become avaiable...
[Nokia USB Flashing Generic]: Port opened OK!
FUR Avaiable!
Adding FUR Client (CMT, State: Ready)...
CMT FUR Ready!
Overriding VPP Setting, USB can't use VPP
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 5AA09885C97BF3B0F6783A6337506F9394F346EF
APE Subsystem Not Found
Looking NPC for 1860000469DB0344CF8AA05C8E4441A170B33D20...
Found 1860000469DB0344CF8AA05C8E4441A170B33D20_10312014_ 44521 PM.NPC.CMT.crt
Backup current NPC...
Written to "1860000469DB0344CF8AA05C8E4441A170B33D20_1112014_ 12437 PM.Recovery.NPC.CMT.crt"
Erasing NPC...
Writing NPC...
IMEI Recovery Finished

sana makatulong po mga ka antech