mga boss share ko lang po c3 no power >>
done kay volcano...
open volcano
tick mtk
tick info,read flash..write flash
then format ...fone.
salamat poh..
Connecting...
Hardware version:CA05
Software version:0101
CPU TYPE:6252
Internal version:8B00
Boot downloading(2)...2%
Detection initiated, connect the phone and power on it...
Vcc: null
Gnd: 2 4
RX: 7, TX: 9
Connecting...
Hardware version:CA05
Software version:0101
CPU TYPE:6252
Internal version:8B00
Boot downloading(2)...27%
Detection initiated, connect the phone and power on it...
Vcc: null
Gnd: 2 4
RX: 7, TX: 9
Connecting...
Hardware version:CA05
Software version:0101
CPU TYPE:6252
Internal version:8B00
Boot downloading complete!
Flash ID: 00EF0040
Flash Type: SF_W25Q16CV
Chip Capacity: 0x200000(2MB)
Mobile phone software version for:M10AW1116
Baud adjust...complete.
Flash reading complete!
privacy:0000
The data has been saved in C:\Documents and Settings\g\Desktop\VOLCANO TOOL 2.1.9\c3 cherry mobile.bin, size: 2 M.
Detection initiated, connect the phone and power on it...
Vcc: null
Gnd: 2 4
RX: 7, TX: 9
File versiA_TEAM_PCB01_GSM_MT6252_S01.M10AW1116.BIN
Searching for passwords...
Could not find any potential passwords.
Connecting...
Hardware version:CA05
Software version:0101
CPU TYPE:6252
Internal version:8B00
Boot downloading complete!
Flash ID: 00EF0040
Flash Type: SF_W25Q16CV
Chip Capacity: 0x200000(2MB)
Mobile phone software version for:M10AW1116
Baud adjust...complete.
This detected file is not encrypted and it¡¯s safe to write data.
Flash erasing complete!
Flash writing complete.
Flash file C:\Documents and Settings\g\Desktop\VOLCANO TOOL 2.1.9\c3 cherry mobile.bin has been written.
Detection initiated, connect the phone and power on it...
Vcc: null
Gnd: 2 4
Waiting for phone's response,please press Power on/off button
Connecting...
Hardware version:CA05
Software version:0101
CPU TYPE:6252
Internal version:8B00
Boot downloading complete!
Flash ID: 00EF0040
Flash Type: SF_W25Q16CV
Chip Capacity: 0x200000(2MB)
Mobile phone software version for:M10AW1116
Baud adjust...complete.
Format range: Start Address: 0x1DD000,Format Length :0x023000
>>Flash erasing complete!