C3262 Restart {Done}..[Reference]
Firmware : Support po ng Z3x Shell
Guide b kamo ?? :
COM Port does not matter, phone will be detect automatically
1. Choose correct flash file(s).
2. Press "Flash" button.
3. Connect phone in flash mode (reconnect battery and connect USB cable).
If you have dead phone, then try to connect it pressing "Hold"+"vol.up" button and connect USB cable.
Code:
Selected model: C3262
Selected port: COM3 Z3X BOX Serial Port
Selected port speed: 921600
Reconnect battery and connect phone to USB cable
Operation aborted
Done with Samsung Tool v.16.3
Selected model: C3262
Selected port: COM3 Z3X BOX Serial Port
Selected port speed: 921600
Reconnect battery and connect phone to USB cable
Phone detected
Opening device... OK
Checking device de******ions... OK
Device de******ion: 04CC 0409
Checking config de******or... OK
Reading OTP register... OK
OTP register: 473E8100
Reading product ID... OK
Product ID: 0002DAAA18DA7120
Reading SCROM version... OK
SCROM version: 0x31
Chipset version: 0x48
Sending loader... OK
Start loader... OK
Waiting phone... OK
Opening device... OK
Checking device de******ions... OK
Device de******ion: 04CC 0409
Checking config de******or... OK
Reading loader version... OK
Loader version: 7.5.16
Init Flash... OK
Loading flash info... OK
Configure Flash... OK
Erase memory for external loader... OK
Sending external loader... OK
Start external loader... OK
Waiting phone... OK
Opening device... OK
Checking device de******ions... OK
Device de******ion: 04CC 0409
Checking config de******or... OK
Reading loader version... OK
Loader version: 7.5.16
Init Flash... OK
Load flash info... OK
Configure Flash... OK OK
Loading PTT file... OK
Reading first block... OK
Erasing first block... OK
Flashing first block... OK
Init bad block... OK
Erasing IMAGE... OK
Erasing LCDACT... OK
Erasing DATA_RW... OK
Erasing DSP... OK
Erasing PAGE... OK
Erasing MAIN... OK
Erasing a... OK
Erasing b... OK
Erasing c... OK
Erasing d... OK
Erasing OTPW... OK
Writing IMAGE... OK
Writing LCDACT... OK
Writing DATA_RW... OK
Writing DSP... OK
Writing PAGE... OK
Writing MAIN... OK
Writing a... OK
Writing b... OK
Writing c... OK
Writing d... OK
Writing OTPW... OK
Rebooting... done
Flashing done (time - 00:03:10)
Done with Samsung Tool v.16.3
Done with Samsung Tool v.16.3Firmware : Support po ng Z3x Shell
Guide b kamo ?? :
COM Port does not matter, phone will be detect automatically
1. Choose correct flash file(s).
2. Press "Flash" button.
3. Connect phone in flash mode (reconnect battery and connect USB cable).
If you have dead phone, then try to connect it pressing "Hold"+"vol.up" button and connect USB cable.