Volcano Updated: 2013-09-02
Connecting...
Connection successful,connected state!
Version: V3.8
SN:449-021-288
Port:COM16
After format or Flash you have to press & hold power button for at least 1.30 mins.
Note for win7 users :
Start your Win 7 64bit with F8 key and choose 'Disable Driver Signature Enforcement'.
After that the spd drivers will have the ability to be loaded.
Detecting rx and tx...
Vcc: null
Gnd: null
Detection initiated, connect the phone and power on it...
Spreadtrum RX: 3, TX: 2
Continue to detect BOOT...
Spreadtrum NBOOT: 5 [6600D]
Detection completed with 11.70 seconds!
Setting pinouts...
Pinout setting complete.
Available Ports:COM2 COM16
Detection initiated...
Vcc: null
Gnd: null
Analyzing D+ and D-...
User stop
Pinouts are not fonud!
Detection initiated, connect the phone and power on it...
Vcc: null
Gnd: null
Analyzing Rx and Tx...
User stop
Pinouts are not fonud!
Reset pinouts...
Reset pinouts...OK.
Waiting for phone's response, press the Power on the phone.
Internal version: Spreadtrum Boot Block version 2.0
Boot downloaded.
Start boot please wait a moment....
BOOT Ver: Spreadtrum Boot Block version 1.2
CPU TYPE:SC6610/20 [66100000]
Please select Boot J and try again.
Please change Boot or reduce Baudrate, try it again.
Ready to read/write again, please remove the power supply clip or battery and then re-loaded it.
Detection initiated, connect the phone and power on it...
Vcc: null
Gnd: null
Analyzing Rx and Tx...
User stop
Pinouts are not fonud!
Waiting for phone's response, press the Power on the phone...
Please change Boot or reduce Baudrate, try it again.
Ready to read/write again, please remove the power supply clip or battery and then re-loaded it.
Detecting rx and tx...
Vcc: null
Gnd: null
Detection initiated, connect the phone and power on it...
Spreadtrum RX: 3, TX: 2
Continue to detect BOOT...
Spreadtrum NBOOT: 5 [6600D]
Detection completed with 9.02 seconds!
Setting pinouts...
Pinout setting complete.
Waiting for phone's response, press the Power on the phone.
Internal version: Spreadtrum Boot Block version 2.0
Boot downloaded.
Start boot please wait a moment....
BOOT Ver: Spreadtrum Boot Block version 1.2
CPU TYPE:SC6610/20 [66100000]
Please select Boot J and try again.
Please change Boot or reduce Baudrate, try it again.
Ready to read/write again, please remove the power supply clip or battery and then re-loaded it.
Waiting for phone's response, press the Power on the phone.
Internal version: Spreadtrum Boot Block version 2.0
Boot downloaded.
Start boot please wait a moment....
Spreadtrum Boot Block version 1.2
CPU TYPE:SC6610/20 [66100000]
FLASH ID: 00C8004000160000
Flash Type:[GD] GD25Q32
Size:0x400000(4MB)
Reading...72%
Reading failed
Reading...72%
Error50
Process is terminated
Please change Boot or reduce Baudrate, try it again.
Ready to read/write again, please remove the power supply clip or battery and then re-loaded it.
Waiting for phone's response, press the Power on the phone...
Please change Boot or reduce Baudrate, try it again.
Ready to read/write again, please remove the power supply clip or battery and then re-loaded it.
Reset pinouts...
Reset pinouts...OK.
Waiting for phone's response, press the Power on the phone
Internal version: Spreadtrum Boot Block version 2.0
Boot downloaded.
Start boot please wait a moment....
Spreadtrum Boot Block version 1.2
CPU TYPE:SC6610/20 [66100000]
FLASH ID: 00C8004000160000
Flash Type:[GD] GD25Q32
Size:0x400000(4MB)
Reading...77%
Reading failed
Reading...77%
Error50
Process is terminated
Please change Boot or reduce Baudrate, try it again.
Ready to read/write again, please remove the power supply clip or battery and then re-loaded it.
Waiting for phone's response, press the Power on the phone.
Internal version: Spreadtrum Boot Block version 2.0
Boot downloaded.
Start boot please wait a moment....
Spreadtrum Boot Block version 1.2
CPU TYPE:SC6610/20 [66100000]
FLASH ID: 00C8004000160000
Flash Type:[GD] GD25Q32
Size:0x400000(4MB)
Reading completed.
The data has been saved in D:\Volcano\VolcanoTool_v2.2.9\MOCOR_09A_MP.W11.16_P7_Release_20130916_151953_*********.bin, size: 4 M.
Waiting for phone's response, press the Power on the phone
Internal version: Spreadtrum Boot Block version 2.0
Boot downloaded.
Start boot please wait a moment....
Spreadtrum Boot Block version 1.2
CPU TYPE:SC6610/20 [66100000]
FLASH ID: 00C8004000160000
Flash Type:[GD] GD25Q32
Size:0x400000(4MB)
Writing completed.
Flash file D:\Volcano\Cherry Mobile\C8\C8\C8\6610_GD25Q32.bin has been written.
Screen Lock input order:
¢Ù ¢Ú ¢Û
¢Ü ¢à ¢Þ
¢ß ¢à ¢á
[privacy lock]:0000
Software has two ways to find password, it may have different results to click button again.
Waiting for phone's response, press the Power on the phone.
Internal version: Spreadtrum Boot Block version 2.0
Boot downloaded.
Start boot please wait a moment....
BOOT Ver: Spreadtrum Boot Block version 1.2
CPU TYPE:SC6610/20 [66100000]
Please select Boot J and try again.
Please change Boot or reduce Baudrate, try it again.
Waiting for phone's response, press the Power on the phone.
Internal version: Spreadtrum Boot Block version 2.0
Boot downloaded.
Start boot please wait a moment....
Spreadtrum Boot Block version 1.2
CPU TYPE:SC6610/20 [66100000]
FLASH ID: 00C8004000160000
Flash Type:[GD] GD25Q32
Size:0x400000(4MB)
Writing completed.
IMEI has been written.
Ready to read/write again, please remove the power supply clip or battery and then re-loaded it.
Waiting for phone's response, press the Power on the phone
Please change Boot or reduce Baudrate, try it again.
Waiting for phone's response, press the Power on the phone.
Internal version: Spreadtrum Boot Block version 2.0
Boot downloaded.
Start boot please wait a moment....
Spreadtrum Boot Block version 1.2
CPU TYPE:SC6610/20 [66100000]
FLASH ID: 00C8004000160000
Flash Type:[GD] GD25Q32
Size:0x400000(4MB)
Set to Factory successfully.
Simple search:
[privacy lock]:0000
Looking for passwords,please wait...
[Privacy Lock] 0000
>>Looking for passwords complete.
