REFERENCE Cherry Mobile FLAME 2.0 (DEAD BOOT) done sa atf nitro

[RemliG]

PHONE MODEL

TOOLS ==ATF NITRO or ATF BOX (note-JTAG ACTIVATED-)
==EMMC JTAG ADAPTOR
==MICRO USB (for power supply purpose)

FIRMWARE NEEDED ==download her http://www.4shared.com/file/_AqGpGig/CHERRY_MOBILE_FLAME_20_FACTORY.html


PROCEDURE

- disassemble phone
- soldered TP pinout with EMMC ADAPTOR

- AFTER TP pinout soldered (tap wire using color coding EMMC JTAG ADAPTOR)
- conect phone to box,micro usb also

==run ATF JTAG SOFTWARE
==click ( SELECT PHONE ) and browse the you download --CHERRY MOBILE FLAME 2.0 FACTORY

==click ( RESET JTAG ) note --to check if the phone connect to box

==now click ( RESTORE BOOT ) note --for flashing the phone
8->medyo matagal po flashing 40-45 minutes kaya wait lng,,(be patient)

<<<< ON PROCESS FLASHING >>>> cnsya na po medyo malabo kuha ko

>>>> FINISH FLASHING <<<<=D>=D>=D>=D>=D>

==== AFTER FLASHING FORMAT THE PHONE =====
**press together power key and volume up wait until RED SCREEN COME UP then release power key and vol up **
== here my screen shot==

** select WIPE DATA/FACTORY RESET press power for OK
** then YES-DELETE USER DATA press again power key for OK
** select REBOOT SYSTEM NOW press power for OK
(( NOTE YOU SHOULD DO THAT FORMAT FOR IMEI NULL REBUILD ))

=D>=D>=D> FINISH PRODUCT =D>=D>=D>

><
By== REMLIG ==