T
theghost
Anonymous
dinala sa'kin ang Cherry Mobile Flare S nag factory reset lang ang may-ari
di nag loading ang software ng maayos, "Unfortunately OOBE has stopped."
(as shown here in this picture)
Una ginawa ko pumasok ako sa RECOVERY MODE
Vol up + Power then wipe to factory reset and wipe cache partition,
pero sadly NO LUCK.
after that check ko yung version ng software by pressing
Vol down + power (FACTORY MODE) nakita ko Stock v7
kaya naghanap ako, searching ng matagal hanggang may na TSAMBAHAN...
ito nakita ko: (ibabahagi ko ito sa inyo, since FREE na man po ito)
Code:
Cherry Mobile Flare S Files SP Flash Tool: http://goo.gl/zrJlDS Vcom Driver: https://www.mediafire.com/?vz4hectas1k7vvt Stock v7 Rooted: https://www.mediafire.com/?iieweducs658thx Stock v7 Clean: http://www.mediafire.com/download/5p7pd30p7lb935v/q360.rar
WARNING: Dapat recognize muna ang unit by installing VCOM Driver para walang hassle sa flashing at iwasan na maisama sa file for flashing ang NVRAM.bin kundi yari ang IMEI niyo.
Code:
Instructions: 1.Extract Stock ROM zip file in SP FLASH TOOL Folder under Backup data folder. 2.After extracting, Open SP FLASH TOOL. 3.Turn off your device and remove the battery. 4.In the program, Click "Scatter-loading" and locate the MT6582_Android_scatter_emmc.txt in Stock ROM Folder. 5.Press F9 (keyboard) or click download. 6.The program will prompt you a warning, just hit Yes. 7.Plug your device to your computer and put back your battery. 8.Just wait until the process is done. 9.If flashing is success reboot device then wait.
NOTE: TESTED ko na po ito, pero TRY niyo lang sa inyo... AT YOUR OWN RISK
ang ginamit kong rom ay STOCK v7 CLEAN at heto DONE at PERA na sa wakas!
CREDITS: To the Original Uploaders and Testers, Maraming Salamat Po!