- Joined
- Dec 10, 2017
- Messages
- 269
- Reaction score
- 175
- Points
- 201
Procedure:
1.Phone battery must 50% charge.
2.Install Vcom Driver if needed
3.Phone must be off and without battery
4.Open NCK Crack 2.5.6.2
5.Select MT6752
6.Select on Service Reset FRP
7.Plug-in USB cable Type C then insert battery
8.Loader turn red to 100% green.
wait after see charging mode on screen of the phone. plug-out then power on....done!
Skip all content to see main homescreen.
1.Phone battery must 50% charge.
2.Install Vcom Driver if needed
3.Phone must be off and without battery
4.Open NCK Crack 2.5.6.2
5.Select MT6752
6.Select on Service Reset FRP
7.Plug-in USB cable Type C then insert battery
8.Loader turn red to 100% green.
wait after see charging mode on screen of the phone. plug-out then power on....done!
Skip all content to see main homescreen.