alex93.
Bios Access
share ko lng po ito. Hang sa Logo na XOLO pero ang unit nia sa Likod Cherry Moble Life..sa Model Number naman A500L andyan po sa baba ang image nang Model Number.
Take note po pa backup muna nang unit bago iFlash para iwas DeadBoot
ito naman ang FW andyan na po ang lahat:
https://www.gsmsolutionph.com/2016/10/cherry-mobile-life-tested-firmware.html
ito po ang image nang phone before Flashing
ito nman po ang image nang NCK tsaka Phone after Flashing
Flash files count is :11
Action : Firmware update.
Selected 0-By CPU: MT6571_EMMC
Exe version: NCKDongle AndroidMTK 2.5.6.2
Scenario: Full Flash
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM8)
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6572_S00
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 512 MB DRAM
----------------------------------------------------
EMMC: (28Gb+4096Mb) HYNIX 0x483447316404
EMMC FW VERSION: 86:00:00:00:00:00:00:00
EMMC CID: 90014A48344731 : 000000000000000000
EMMC UA SIZE: 0xe7000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0xe7600000 [3.615 GB]
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detecting high speed port, wait......
Detected : MediaTek DA USB VCOM (Android) (COM18)
Flash EMMC Algo Start.
Starting flash.
FORMAT EMMC FLASH : BEGIN: 0x2c740000 - LEN: 0x17800000
FORMAT EMMC FLASH : BEGIN: 0x43f40000 - LEN: 0x52c00000
Send preloader...
Download firmware to flash now...
Wait untill phone will start charging.
All done.
maraming salamat po sa pag view sana mka tulong..^_^
Take note po pa backup muna nang unit bago iFlash para iwas DeadBoot
ito naman ang FW andyan na po ang lahat:
https://www.gsmsolutionph.com/2016/10/cherry-mobile-life-tested-firmware.html
ito po ang image nang phone before Flashing
ito nman po ang image nang NCK tsaka Phone after Flashing
Flash files count is :11
Action : Firmware update.
Selected 0-By CPU: MT6571_EMMC
Exe version: NCKDongle AndroidMTK 2.5.6.2
Scenario: Full Flash
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM8)
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6572_S00
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 512 MB DRAM
----------------------------------------------------
EMMC: (28Gb+4096Mb) HYNIX 0x483447316404
EMMC FW VERSION: 86:00:00:00:00:00:00:00
EMMC CID: 90014A48344731 : 000000000000000000
EMMC UA SIZE: 0xe7000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0xe7600000 [3.615 GB]
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detecting high speed port, wait......
Detected : MediaTek DA USB VCOM (Android) (COM18)
Flash EMMC Algo Start.
Starting flash.
FORMAT EMMC FLASH : BEGIN: 0x2c740000 - LEN: 0x17800000
FORMAT EMMC FLASH : BEGIN: 0x43f40000 - LEN: 0x52c00000
Send preloader...
Download firmware to flash now...
Wait untill phone will start charging.
All done.
maraming salamat po sa pag view sana mka tulong..^_^