Cherry mobile Rover 2 firmware

[jamsiah]

Card found: S/N : 1F602012 , v0136
Chinese Miracle II [SPD module] v 1.27

Set mode to : SP [SC773x] eMMC [Android 6.x]

Operation : Read FullFlash [ v1.27 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
-> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key
3. Insert cable


- > Wait phone connected ...

Phone found! [ 151 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name : Cherry_Rover_2
Model Brand : Cherry_Mobile
Model Device: Cherry_Rover_2
AndrVersion : 7.0
BaseBand CPU: SP7731CEA
Project Ver : Cherry_Q840_Rover2_01122018_V01
Model Ext : Rover_2

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ...

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731C_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_WCN_Trunk_W17.27.4_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_480x800.bin
[Read Ok] : fblogo_480x800.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Read Ok] : sysinfo.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Build Ok] : userdata.img

AndroidInfo created
Firmware Size : 2740 MiB
Saved to : C:\Users\ngc\Downloads\backup cm2\SP7731CEA_Cherry_Rover_2_7.0_Cherry_Q840_Rover2_01122018_V01_Rover_2\
Done!

Elapsed: 00:23:08

Reconnect Power/Cable

firmware link.
https://www.mediafire.com/file/k1kb...erry_Q840_Rover2_01122018_V01_Rover_2.7z/file

https://postimg.cc/D4gc8VC0
https://postimg.cc/hX7p1Yvy

HIT THANK KUNG NAKUTULONG.