TUT Reflashing Deadboot/Bootloop or softbrick Flare Dash root/unroot
Before start
REQUIREMENTS :
1.PC/LAPTOP
2.FLARE DASH USB CABLE
3.ADB DRIVER - (kasama na sa flare dash firmawre)
4.QUALCOMM USB DRIVER - http://www.mediafire.com/download/8dbfehhtb8ak328/JB_pcdrivers.rar
5.FLARE DASH FIRMWARE - https://drive.google.com/folderview?id=0B_vDHGIQKlDbQ3lLUUhMRXJ1N3c&usp=sharing
6.K-TOUCH FLASHTOOL - (kasama na sa flare dash firmawre)
7.Common sense
Note:All drivers will be tested on windows 32bit but you must try this if youre using windows 64bit feedback if work
http://pdanet.co/bin/PdaNetA4150.exe
Here we go
1.Extract on desktop firmware and Drivers
2.Install JB and ADB drivers will be located on pcdrivers/drivers/ 32bit user only
Note:if youre using 64bit run as admin pdanet required internet connection and need to connect your phone on pc/loptop before vibrate by pressing power off + volume down in just 4 sec. this is very important to works properly and lastly note skip this tut if your using windows 64bit and follow step # 4
3.Shutdown your dash and connect to pc/loptop by pressing power off + volume down in 4sec. then install qualcomm usb drivers note:dapat dito mabilis ka para madetect agad at mainstal ung drivers try nyo na dn kung pwedeng idirect install ung drivers then go to device manager if detected na ung dash nyo may makikita kau dyang Qualcomm-HS-Usb drivers if hindi ulitin and step 3 procedure
4.Run as admin K-touch flashtools and check or mark the following (Note:disable nyo muna antivirus nyo kasi false positive pero di sya makakaapekto sa pc/loptop nyo)
Check the ff.
Preloader
Mass Storage and Cdt then uncheck efs
5.Click on browse then locate flare dash firmware you extracted on desktop next browse again CDT folder (note: ung CDT Folder nasa loob ng folder firmware ng dash sorry ngaun lang naupdate
6.Go to Device manager at tandaan ang Com number
7.Sa baba ng Dloader on the Left side type nyo ung na nasa device manager
Example:Qualcomm-HS-USB QDloader 9008 (COM13) (Note:Ang kukunin at ilalagay nyo lng dyan sa device manager ung katabi ng COM"13" ilagay nyo dun sa baba ng Dloader)
8.Lastly Step On the right side sa baba ng Dignostic press to start flashing your deadboot/bootloop Flare Dash just wait a few minutes it takes 5mins to flash once Download complete tanggalin mo na sa saksak ung dash mo at mabubukas na yan
Before start
REQUIREMENTS :
1.PC/LAPTOP
2.FLARE DASH USB CABLE
3.ADB DRIVER - (kasama na sa flare dash firmawre)
4.QUALCOMM USB DRIVER - http://www.mediafire.com/download/8dbfehhtb8ak328/JB_pcdrivers.rar
5.FLARE DASH FIRMWARE - https://drive.google.com/folderview?id=0B_vDHGIQKlDbQ3lLUUhMRXJ1N3c&usp=sharing
6.K-TOUCH FLASHTOOL - (kasama na sa flare dash firmawre)
7.Common sense
Note:All drivers will be tested on windows 32bit but you must try this if youre using windows 64bit feedback if work
http://pdanet.co/bin/PdaNetA4150.exe
Here we go
1.Extract on desktop firmware and Drivers
2.Install JB and ADB drivers will be located on pcdrivers/drivers/ 32bit user only
Note:if youre using 64bit run as admin pdanet required internet connection and need to connect your phone on pc/loptop before vibrate by pressing power off + volume down in just 4 sec. this is very important to works properly and lastly note skip this tut if your using windows 64bit and follow step # 4
3.Shutdown your dash and connect to pc/loptop by pressing power off + volume down in 4sec. then install qualcomm usb drivers note:dapat dito mabilis ka para madetect agad at mainstal ung drivers try nyo na dn kung pwedeng idirect install ung drivers then go to device manager if detected na ung dash nyo may makikita kau dyang Qualcomm-HS-Usb drivers if hindi ulitin and step 3 procedure
4.Run as admin K-touch flashtools and check or mark the following (Note:disable nyo muna antivirus nyo kasi false positive pero di sya makakaapekto sa pc/loptop nyo)
Check the ff.
Preloader
Mass Storage and Cdt then uncheck efs
5.Click on browse then locate flare dash firmware you extracted on desktop next browse again CDT folder (note: ung CDT Folder nasa loob ng folder firmware ng dash sorry ngaun lang naupdate
6.Go to Device manager at tandaan ang Com number
7.Sa baba ng Dloader on the Left side type nyo ung na nasa device manager
Example:Qualcomm-HS-USB QDloader 9008 (COM13) (Note:Ang kukunin at ilalagay nyo lng dyan sa device manager ung katabi ng COM"13" ilagay nyo dun sa baba ng Dloader)
8.Lastly Step On the right side sa baba ng Dignostic press to start flashing your deadboot/bootloop Flare Dash just wait a few minutes it takes 5mins to flash once Download complete tanggalin mo na sa saksak ung dash mo at mabubukas na yan
