What's new
PinoyTechnician

This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Chinese smart watch software

mcoy29

Registered
Joined
Jan 23, 2016
Messages
2,192
Reaction score
148
Points
381
Location
City of San Fernando pampanga
[FONT=&quot]hinese smart watch software OK with CM2 MTK

[/FONT]
attachment.php


Card found : S/N : D3889E80 , v0134
Chinese Miracle II [MTK module] v 1.58


Operation : Read UserCode [ v1.58 ]


1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey ( '*' )


Wait for phone...
Phone found! [ 125 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 6261
BB_CPU_HW : CB01
BB_CPU_SW : 0001
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6261_S0000
BB_CPU_SN : 69BD45523A514459353C164D37A9ABD0
BROM Protocol Version : 05
Setting...
Setting done , result code 0x000E
BROM stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x8E
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x0113 , [Winbond] SF_W25Q32JV
[0] : FLASH_DIE : 00EF 0070 0016 0000
[0] : FLASH_LEN : 0x00400000
INT_RAM : 0x0000D000
EXT_RAM : 0x00400000


Read ExtData
Sorting ExtData
Reading UserCode


Active : Yes , Code : 7788


PLock|MobTrack : Not active


Done!
Elapsed: 00:00:07
Reconnect Power/Cable!




Operation : Read Flash [ v1.58 ]


1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey ( '*' )


Wait for phone...
Phone found! [ 125 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 6261
BB_CPU_HW : CB01
BB_CPU_SW : 0001
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6261_S0000
BB_CPU_SN : 69BD45523A514459353C164D37A9ABD0
BROM Protocol Version : 05
Setting...
Setting done , result code 0x000E
BROM stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x8E
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x0113 , [Winbond] SF_W25Q32JV
[0] : FLASH_DIE : 00EF 0070 0016 0000
[0] : FLASH_LEN : 0x00400000
INT_RAM : 0x0000D000
EXT_RAM : 0x00400000
Reading Flash Content now ...


Read Flash now
Read Ok , 4194304 bytes read
Check and collect compile info
File_Info : MTK61D_BTDIALER_11C_PCB01_gprs_MT6261_S00.LD991B_V 5_8_COB_RYQ_YX_ZX_DZ09_3A01_JXD7789_9304_J_A_V12_1 .bin
FileVersion : LD991B_V5.8_COB_RYQ_YX_ZX_DZ09_3A01_JXD7789_9304_J _A_V12.1
Saved to : C:\InfinityBox\CM2MTK\Read_out\MTK61D_BTDIALER_11C _PCB01_gprs_MT6261_S00.LD991B_V5_8_COB_RYQ_YX_ZX_D Z09_3A01_JXD7789_9304_J_A_V12_1.bin


Done!
Elapsed: 00:00:15
Reconnect Power/Cable!


DOWNLOAD FIRMWARE
 
Back
Top