guiananrodel
Registered
share lang po firmware oppo a1601 os 6.0.1,backup ko po sa nck pro dongle + umt
link:
https://www.mediafire.com/file/5aka..._GXQ6580_WEG_L_P69(2019_01_26_14_05).rar/file
ito po larawan niya:
eto po info:
PRELOADER
version: MTK_BLOADER_INFO_v21
name: preloader_gxq6580_weg_l.bin
CPU: MT6752
CUSTOM NAME: CUST
Flash style: EMMC
Flash definitions in preloader: 9
[1]Type: MCP(eMMC+DDR2) CID: 110100303034474530
[2]Type: MCP(eMMC+DDR2) CID: 1501004B3758564D42
[3]Type: MCP(eMMC+DDR3) CID: 90014A483847316505
[4]Type: MCP(eMMC+DDR3) CID: 150100513732534D42
[5]Type: MCP(eMMC+DDR3) CID: 150100463732324D42
[6]Type: MCP(eMMC+DDR3) CID: 880103455042313030
[7]Type: MCP(eMMC+DDR3) CID: 700100454838434538
[8]Type: MCP(eMMC+DDR3) CID: 700100454838454538
[9]Type: MCP(eMMC+DDR3) CID: 150100513832334D42
load adress: 0x200d00
PRELOADER END
Android Info
Build ID: LMY47I
Display ID: LMY47I test-keys
Version: 5.1
Build Date: Fri Jul 28 01:24:00 CST 2017
Model: gxq6580_weg_l
Brand: alps
Device: gxq6580_weg_l
Manufacturer: alps
Region: US
Mediatek Version Release: ALPS.L1.MP6.V2_GXQ6580.WEG.L_P69
Android Info END
NVARAM
IMEI[1] from NVRAM: 358651668336751
IMEI[2] from NVRAM: 358651668336769
NVRAM END
Action : Boot Info.
Selected 0-By CPU:ELBRUS
Exe version: NCKDongle AndroidMTK 2.5.9.3
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM_V1632 (Android) (COM14)
Boot mode: Preloader
BBCHIP: 6580 0 ca00
Using Algo 1.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6580
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (29Gb+8192Mb) SAMSUNG 0x4b3558564d42
EMMC FW VERSION: 01:00:00:00:00:00:00:00
EMMC CID: 1501004B3558564D42 : 00000000000000
EMMC UA SIZE: 0xe9000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0xe9480000 [3.645 GB]
-Reading GPT Drive OK
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM35)
This phone have FRP partition.
Build ID: LMY47I
Display ID: LMY47I test-keys
Version: 5.1
Build Date: Fri Jul 28 01:24:00 CST 2017
Model: gxq6580_weg_l
Brand: alps
Device: gxq6580_weg_l
Region: US
Mediatek Version Release: ALPS.L1.MP6.V2_GXQ6580.WEG.L_P69
IMEI[1]: 358651668336751
IMEI[2]: 358651668336769
Read done.
Wait untill phone will start charging.
All done.
link:
https://www.mediafire.com/file/5aka..._GXQ6580_WEG_L_P69(2019_01_26_14_05).rar/file
ito po larawan niya:
eto po info:
PRELOADER
version: MTK_BLOADER_INFO_v21
name: preloader_gxq6580_weg_l.bin
CPU: MT6752
CUSTOM NAME: CUST
Flash style: EMMC
Flash definitions in preloader: 9
[1]Type: MCP(eMMC+DDR2) CID: 110100303034474530
[2]Type: MCP(eMMC+DDR2) CID: 1501004B3758564D42
[3]Type: MCP(eMMC+DDR3) CID: 90014A483847316505
[4]Type: MCP(eMMC+DDR3) CID: 150100513732534D42
[5]Type: MCP(eMMC+DDR3) CID: 150100463732324D42
[6]Type: MCP(eMMC+DDR3) CID: 880103455042313030
[7]Type: MCP(eMMC+DDR3) CID: 700100454838434538
[8]Type: MCP(eMMC+DDR3) CID: 700100454838454538
[9]Type: MCP(eMMC+DDR3) CID: 150100513832334D42
load adress: 0x200d00
PRELOADER END
Android Info
Build ID: LMY47I
Display ID: LMY47I test-keys
Version: 5.1
Build Date: Fri Jul 28 01:24:00 CST 2017
Model: gxq6580_weg_l
Brand: alps
Device: gxq6580_weg_l
Manufacturer: alps
Region: US
Mediatek Version Release: ALPS.L1.MP6.V2_GXQ6580.WEG.L_P69
Android Info END
NVARAM
IMEI[1] from NVRAM: 358651668336751
IMEI[2] from NVRAM: 358651668336769
NVRAM END
Action : Boot Info.
Selected 0-By CPU:ELBRUS
Exe version: NCKDongle AndroidMTK 2.5.9.3
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM_V1632 (Android) (COM14)
Boot mode: Preloader
BBCHIP: 6580 0 ca00
Using Algo 1.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6580
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (29Gb+8192Mb) SAMSUNG 0x4b3558564d42
EMMC FW VERSION: 01:00:00:00:00:00:00:00
EMMC CID: 1501004B3558564D42 : 00000000000000
EMMC UA SIZE: 0xe9000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0xe9480000 [3.645 GB]
-Reading GPT Drive OK
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM35)
This phone have FRP partition.
Build ID: LMY47I
Display ID: LMY47I test-keys
Version: 5.1
Build Date: Fri Jul 28 01:24:00 CST 2017
Model: gxq6580_weg_l
Brand: alps
Device: gxq6580_weg_l
Region: US
Mediatek Version Release: ALPS.L1.MP6.V2_GXQ6580.WEG.L_P69
IMEI[1]: 358651668336751
IMEI[2]: 358651668336769
Read done.
Wait untill phone will start charging.
All done.
Last edited by a moderator: