dogtrax2k
Registered
CM Astro hang lang done sa NCKcrack...
Ito po NCKcrack at ito po gamit ko firmware ASTRO 2s
ito po
1st read info
Action : Boot Info.
Selected 0-By CPUM 0-By CPUMT6571_EMMC
Exe version: NCKDongle AndroidMTK 2.5.6.2
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : PreLoader USB VCOM Port (COM10)
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6580_S00
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 512 MB DRAM
----------------------------------------------------
EMMC: (29Gb+4096Mb) HYNIX 0x483447326111
EMMC FW VERSION: 02:00:00:00:00:00:00:00
EMMC CID: 90014A48344732 : 000000000000000000
EMMC UA SIZE: 0xe9000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0xe9c00000 [3.652 GB]
IMEI marker was found in nvram
IMEI[1] from NVRAM: 351659072672759
IMEI[2] from NVRAM: 351659072672767
Partition table saved to: Android_MTK\partition_tables\
Wait untill phone will start charging.
All done.
NOTE:
done po siya sa info pero nung load kuna firmware at flash kuna insert usb sa phone ayaw my error lagi di na tuloy kaya try ko ulit flash din insert usb sa phone ng walang battey at nag ok siya tumuloy... ito po screen shot
Flash files count is :11
Action : Firmware update.
Selected 0-By CPU: MT6580
Exe version: NCKDongle AndroidMTK 2.5.6.2
Scenario: Safe Flash
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : PreLoader USB VCOM Port (COM10)
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6580_S00
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 512 MB DRAM
----------------------------------------------------
EMMC: (29Gb+4096Mb) HYNIX 0x483447326111
EMMC FW VERSION: 02:00:00:00:00:00:00:00
EMMC CID: 90014A48344732 : 000000000000000000
EMMC UA SIZE: 0xe9000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0xe9c00000 [3.652 GB]
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detecting high speed port, wait......
Detected : DA USB VCOM Port (COM23)
Warning, flashing preloader disabled!
If you change android version, preloader must be flashed.
Flash EMMC Algo Start.
Starting flash.
Send preloader...
Download firmware to flash now...
Wait untill phone will start charging.
All done
Done try ku na buhayain lagay ku muna si batt at yun ok na siya
maraming sa lamat sa pag view at sana makadagdag po sa ting lahat.........
#BlackAttack
... paki like nalang kung gusto po =))=))=))=))
Ito po NCKcrack at ito po gamit ko firmware ASTRO 2s
ito po
1st read info
Action : Boot Info.
Selected 0-By CPUM 0-By CPUMT6571_EMMC
Exe version: NCKDongle AndroidMTK 2.5.6.2
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : PreLoader USB VCOM Port (COM10)
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6580_S00
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 512 MB DRAM
----------------------------------------------------
EMMC: (29Gb+4096Mb) HYNIX 0x483447326111
EMMC FW VERSION: 02:00:00:00:00:00:00:00
EMMC CID: 90014A48344732 : 000000000000000000
EMMC UA SIZE: 0xe9000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0xe9c00000 [3.652 GB]
IMEI marker was found in nvram
IMEI[1] from NVRAM: 351659072672759
IMEI[2] from NVRAM: 351659072672767
Partition table saved to: Android_MTK\partition_tables\
Wait untill phone will start charging.
All done.
NOTE:
done po siya sa info pero nung load kuna firmware at flash kuna insert usb sa phone ayaw my error lagi di na tuloy kaya try ko ulit flash din insert usb sa phone ng walang battey at nag ok siya tumuloy... ito po screen shot
Flash files count is :11
Action : Firmware update.
Selected 0-By CPU: MT6580
Exe version: NCKDongle AndroidMTK 2.5.6.2
Scenario: Safe Flash
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : PreLoader USB VCOM Port (COM10)
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6580_S00
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 512 MB DRAM
----------------------------------------------------
EMMC: (29Gb+4096Mb) HYNIX 0x483447326111
EMMC FW VERSION: 02:00:00:00:00:00:00:00
EMMC CID: 90014A48344732 : 000000000000000000
EMMC UA SIZE: 0xe9000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0xe9c00000 [3.652 GB]
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detecting high speed port, wait......
Detected : DA USB VCOM Port (COM23)
Warning, flashing preloader disabled!
If you change android version, preloader must be flashed.
Flash EMMC Algo Start.
Starting flash.
Send preloader...
Download firmware to flash now...
Wait untill phone will start charging.
All done
Done try ku na buhayain lagay ku muna si batt at yun ok na siya
maraming sa lamat sa pag view at sana makadagdag po sa ting lahat.........
#BlackAttack
... paki like nalang kung gusto po =))=))=))=))
Last edited by a moderator:
