Cm e2

[glennarmecin]

TESTED NA POH ETO ^^
CM E2 TRI-SIM

https://www.4shared.com/rar/y276ftuDgm/cm_E2.html

Chinese Miracle II [MTK module] v 1.58

Load File
File_Info : HUIYUE50_12864_11B_PCB01_gprs_MT6250_S00.CHERRY_E2_V07.bin
FileVersion : CHERRY_E2_V07
Load File Ok

Operation : Flash [ v1.58 ]

======= Flash
Files set for flashing :


1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey ( '*' )

Wait for phone...
Device boot not done
Check Drivers
Try again

Boot Error!

Operation Failed
Elapsed: 00:00:40
Reconnect Power/Cable!


Operation : Flash [ v1.58 ]

======= Flash
Files set for flashing :


1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey ( '*' )

Wait for phone...
Device boot not done
Check Drivers
Try again

Boot Error!

Operation Failed
Elapsed: 00:00:40
Reconnect Power/Cable!


Operation : Flash [ v1.58 ]

======= Flash
Files set for flashing :


1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey ( '*' )

Wait for phone...
Device boot not done
Check Drivers
Try again

Boot Error!

Operation Failed
Elapsed: 00:00:40
Reconnect Power/Cable!


Operation : Flash [ v1.58 ]

======= Flash
Files set for flashing :

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey ( '*' )

Wait for phone...
Phone found! [ 41 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 625A
BB_CPU_HW : CA01
BB_CPU_SW : 0001
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6250_S0000
BB_CPU_SN : EC2852316FC8C4A450D7D629E7D85C2D
BROM Protocol Version : 05
Setting...
Setting done , result code 0x000E
BROM stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
InitRes : 00000000
DEV[0] : C800 6000 1800 0000
DEV[1] : 0000 0000 0000 0000
DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x88
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x00F4 , [GigaDevice] GD25LQ128
[0] : FLASH_DIE : 00C8 0060 0018 0000
[0] : FLASH_LEN : 0x01000000
INT_RAM : 0x0000D400
EXT_RAM : 0x00800000

File_Info : HUIYUE50_12864_11B_PCB01_gprs_MT6250_S00.CHERRY_E2_V07.bin
FileVersion : CHERRY_E2_V07
Flash now

Erase region , wait ...
Write data , wait ...


Done!
Elapsed: 00:02:57
Reconnect Power/Cable!


**************************************************

PASSWORD PROTECTED