CM TOUCH 2 NCK Back Up By ANTGSMWinsam
Brand : Cherry_Mobile
ProdName : Flare_P1_Mini
ProdModel : Flare_P1_Mini
Device : Flare_P1_Mini
AndroidVer: 6.0
MTKxCPU : MT6580
MTKxPRJ : alps-mp-m0.mp1-V2.34_keytak6580.weg.m_P28
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : PreLoader USB VCOM (Android) (COM6)
Boot mode: Preloader
Using Algo 1.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6580
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 512 MB DRAM
----------------------------------------------------
EMMC: (29Gb+4096Mb) TOSIBA 0x303034474530
EMMC FW VERSION: 01:00:00:00:00:00:00:00
EMMC CID: 110100303034474530 : 00000000000000
EMMC UA SIZE: 0xec000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0xec480000 [3.692 GB]
-Reading GPT Drive OK
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM Port (COM5)
Build ID: MRA58K
Display ID: Cherry_Touch 2_V1.10_08222017
Version: 6.0
Build Date: Tue Aug 22 20:18:30 CST 2017
Model: Flare_P1_Mini
Brand: Cherry_Mobile
Device: Flare_P1_Mini
Manufacturer: Cherry_Mobile
Mediatek Version Release: alps-mp-m0.mp1-V2.34_keytak6580.weg.m_P28
Dumping Preloader.
Start dumping flash, this can take up to 1 hour.......
Start processing proinfo
Reading: BEGIN: 0x80000 - LEN: 0x300000
Start processing nvram
IMEI[1] from NVRAM: 351659074087709
IMEI[2] from NVRAM: 351659074087717
Start processing protect1 ......
Reading: BEGIN: 0x880000 - LEN: 0xa00000
Start processing protect2 ......
Reading: BEGIN: 0x1280000 - LEN: 0xa00000
Start processing lk ......
Start processing boot
Start processing recovery
Start processing logo ......
Start processing frp ......
Reading: BEGIN: 0x4fa0000 - LEN: 0x100000
Start processing nvdata ......
Reading: BEGIN: 0x50a0000 - LEN: 0x2000000
Start processing secro
Reading: BEGIN: 0x9a00000 - LEN: 0x600000
Start processing system
Reading: BEGIN: 0xa800000 - LEN: 0x64000000
Saved to : C:\Users\ZAYN\Documents\Android_MTK\firmware_backup\MT6580_EMMC_Cherry_Mobile_Flare_P1_Mini_6_0_alps-mp-m0_mp1-V2_34_keytak6580_weg_m_P28(2018_09_04_20_35)
Wait untill phone will start charging.
All done.
Firmware...>>>https://www.4shared.com/rar/6VJjYpJPda/CM_TOUCH_2-NCK_Back_Up-By_ANTG.html
May Password po Yan.!
Brand : Cherry_Mobile
ProdName : Flare_P1_Mini
ProdModel : Flare_P1_Mini
Device : Flare_P1_Mini
AndroidVer: 6.0
MTKxCPU : MT6580
MTKxPRJ : alps-mp-m0.mp1-V2.34_keytak6580.weg.m_P28
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : PreLoader USB VCOM (Android) (COM6)
Boot mode: Preloader
Using Algo 1.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6580
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 512 MB DRAM
----------------------------------------------------
EMMC: (29Gb+4096Mb) TOSIBA 0x303034474530
EMMC FW VERSION: 01:00:00:00:00:00:00:00
EMMC CID: 110100303034474530 : 00000000000000
EMMC UA SIZE: 0xec000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0xec480000 [3.692 GB]
-Reading GPT Drive OK
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM Port (COM5)
Build ID: MRA58K
Display ID: Cherry_Touch 2_V1.10_08222017
Version: 6.0
Build Date: Tue Aug 22 20:18:30 CST 2017
Model: Flare_P1_Mini
Brand: Cherry_Mobile
Device: Flare_P1_Mini
Manufacturer: Cherry_Mobile
Mediatek Version Release: alps-mp-m0.mp1-V2.34_keytak6580.weg.m_P28
Dumping Preloader.
Start dumping flash, this can take up to 1 hour.......
Start processing proinfo
Reading: BEGIN: 0x80000 - LEN: 0x300000
Start processing nvram
IMEI[1] from NVRAM: 351659074087709
IMEI[2] from NVRAM: 351659074087717
Start processing protect1 ......
Reading: BEGIN: 0x880000 - LEN: 0xa00000
Start processing protect2 ......
Reading: BEGIN: 0x1280000 - LEN: 0xa00000
Start processing lk ......
Start processing boot
Start processing recovery
Start processing logo ......
Start processing frp ......
Reading: BEGIN: 0x4fa0000 - LEN: 0x100000
Start processing nvdata ......
Reading: BEGIN: 0x50a0000 - LEN: 0x2000000
Start processing secro
Reading: BEGIN: 0x9a00000 - LEN: 0x600000
Start processing system
Reading: BEGIN: 0xa800000 - LEN: 0x64000000
Saved to : C:\Users\ZAYN\Documents\Android_MTK\firmware_backup\MT6580_EMMC_Cherry_Mobile_Flare_P1_Mini_6_0_alps-mp-m0_mp1-V2_34_keytak6580_weg_m_P28(2018_09_04_20_35)
Wait untill phone will start charging.
All done.
Firmware...>>>https://www.4shared.com/rar/6VJjYpJPda/CM_TOUCH_2-NCK_Back_Up-By_ANTG.html
May Password po Yan.!