Description MFC Dongle

[intoy]

What is MFC Dongle ?

A screen lock passcode is a good security measure. If you forget this passcode, One last-resort solution to this is resetting your device which deletes all your data and reverts the device to factory settings. From right now MFC Dongle with a special solution will never lost or distroy device Data which can automatically get the passcode easily.

Package Content:

** 1 x MFC Dongle with USB OTG Cable
** 1 x Sensor Adaptor
** 3 x OTG Cable ( For Samsung ,HTC And iPhone)
** 3 x Data Cables

Compatible with

Apple iPhone 4 4s 5 5s 5c (V7.1.1/ V7.1.2) ,HTC Android and Samsung Android Mobile Phone (V4.3+) etc.

What's New ?

Today we're proud to announce the release of MFC Dongle V1.0.1. More update please check at official website at Welcome To visit | MFC Dongle - For Apple Samsung and HTC

A maintenance release focused on resolving issues within the software. Most of the issues resolved deal with the internal workings of the software. However We have added New functions as below:



Update HTC Android 4.3+

it will try 5 codes then wait 30 seconds while keeping the screen ok about 40 seconds / 5 codes (22 hours to try all codes)

How to:

Unlock phone and go to the phone lock screen and inser MFC Dongle
Future update ... add code detection using light sensor.

Update Samsung Android 4.3+

it will try 5 codes then 30 more seconds of waiting about 40 seconds / 5 codes (22 hours to try all codes) in some mobile phones the delay between codes will increase up to 10 seconds with more wrong codes so delay between codes must be around 10000ms(10seconds) so the waiting time will be 44 hours not 22. You must adjust the delay accordingly.

How to:

Connect the light sensor to the darkest place on the screen insert MFC dongle, wait until unlock is ok (usually the MFC dongle will stop at that point)

How is working ?

* Usb otg +dongle mfc +sensor cable (must be already connect to the mfc ) and put this sensor on the screen iphone(connect the light sensor to the phone in a blank area (blue))-- connect to iPhone
* Connect the light sensor to the phone in a blank area (blue)
* Put a simcard inside the phone
* Call the simcard number
* Answer on the iPhone then go to Contacts
* When the lock code is required insert MFC Dongle
* If you get the message accessory not supported just press ok. Another message might also appear after first minute so you need to press ok to that too otherwise you might miss some codes during the time the message is displayed.
* When we reach the correct code the screen will change to Contacts screen thus triggering the light sensor and the process will stop
* You can now connect the MFC dongle to computer and click read button