Flare S100 Dead [Need Help]

[stigmatized]

tanong ko lang po mga boss sa mga naka experience ng ganito at nasolve din

baka po pwede maka hingi ng konting tulong

base po sa sinundan kong post ni boss FullFlash sa link na ito
CREDIT TO BOSS Yongitechz

Cherry Mobile flare ( s100 ) Deadboot Solution

Cherry mobile Flare
A.K.A ( FLARE)

Sorry sa lahat ng Nag antay, maxado po kasi tayung busy mga bossing ito na po:tgy


Solution For Deadboot


Download first this Files bago tayu mag simula

QPST 2.7 build 399 -
QPST-2.7.399.rar

JB drivers -
JB_pcdrivers.rar

Jelly Bean BP Firmware
note: just pm me sa firmware kung succesful ang pag repair ng boot ng flare nyo....:tgy



WARNING : Supported ito sa mga flare na nadedetect pa ng Pc if hndi ito ma detect sa pc dont do this anymore

Install QPTS (alam ko pamilyar kayo jn.. ginagamit yan sa mga broadband stick..)
install lahat ng drivers para walang aberya


Install drivers

1. Connect deadboot flare to PC / Laptop.

2. Go to device manager, expand PORTS (COM & LPT). Check if there is an item called Qualcomm HSUSB QDLOADER 9008. If the item is there, you are done with driver install. If it does not exist, proceed to step3.

3. If there is no item under PORTS (COM & LPT), check device manager under OTHER DEVICES > Unknown Device

4. Double click UNKNOWN DEVICE > UPDATE DRIVER > BROWSE MY COMPUTER > browse to the folder where you saved extracted the ICS / JB drivers. It will install the driver, if it prompts for unsigned drivers, press INSTALL ANYWAY.

5. It should now be listed under COM PORTS > Qualcomm HSUSB QDLOADER 9008.

Run QPST and reprogram EMMC (dito tayu mag sisimula)

1. Run EMMC SOFTWARE DOWNLOAD.

2. Press BROWSE, it will detect your phone. Look for the PHONE TAB that says DOWNLOAD. Press OK.

3. Put check mark on PROGRAM BOOTLOADERS, PROGRAM MMC DEVICE, TRUSTED.

4. Under FLASH PROGRAMMER FILENAME, enter MPRG8X25.hex

5. Under BOOT IMAGE, enter 8X25_msimage.mbn

6. Press LOAD XML DEF > navigate to your extracted JB firmware > select rawprogram0 > press OPEN.

7. Press LOAD PATCH DEF > navigate to your extracted JB firmware > select patch0 > press OPEN

8. PRESS DOWNLOAD



9. An warning message may appear, TIME OUT WAITING etc etc or COOKIE NOT RECEIVED. If the error is TIME OUT WAITING, press OK and then press SWITCH DEVICE TO DLOAD. Check the flare, it will show RESET FOR ENTRY QPST.


10. Exit EMMC SOFTWARE DOWNLOAD. Proceed to flash Jelly Bean BP Firmware and then flash Jelly Bean img dump...


11. IF ERROR IS COOKIE NOT RECEIVED, sorry it is still bricked.

after Program makikita nyo nalng na may lalabas na "REPAIR ENtRY QPST " or what bsta once na lumabas na ang ENRT QPTS ENTRY " proceed na kau sa Pag install ng JELLY BEAN





Good luck nalang po sa mga gagamit....


Note:Hindi ko pa tested ang sulotion na ito dahil dito "11. IF ERROR IS COOKIE NOT RECEIVED, sorry it is still bricked"

kaya hindi ko nalang tinuloy sa pag gawa ang tanggap kong flare,share ko nalang baka makatulong pa sa iba!!!


Hit thanx button kung nakakatulong mga idol...​

pag click ko po ng SWITCH DEVICE TO DOWNLOAD ito po ang lumalabas

any idea mga boss?

maraming salamat po in advance​

 

[yurhie]

pag may error na lumabas sa software mo jan negative po na ma buhay mo yan at pag chumamba kanaman repair imei ka pa

mas madali po kung sa ATF mo cia ma i flash medjo matagal ngalang pero smooth yan basta may response pa

kasi pag hindi na nag responce at dina binasa negative nadin kahit sa atf.....

 

[RemliG]

uubra ba boss kahit hindi po jtag activated ang atf?

kailangan po JTAG ACTIVATED bos..........

pero sa tingin ko sa trouble mo eMMC na tama

 

[RemliG]

maganda boss salang mo sa ATF JTAG.....
doon ma te testing kung ok pa ung eMMC niya....