flare X v2 frp done

[defender80]

1st step; open nck crack
2nd step;click service
3rd step;click reset frp
wag nyo po e boot ang vol-up at down ito ang logs.

Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM Port (COM9)
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6753_S00
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 3 GB DRAM
----------------------------------------------------
EMMC: (116Gb+24576Mb) SAMSUNG 0x523331424d42
EMMC FW VERSION: 01:00:00:00:00:00:00:00
EMMC CID: 15010052333142 : 000000000000000000
EMMC UA SIZE: 0x3a3e00000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x3a4a00000 [14.572 GB]
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detecting high speed port, wait......
High speed port not detected, aborting!!!!
Error change high speed port!!!!

Boot Fail.!!!.
All done.
at ito ang logs ng walang boot button salpak lng ang usb.

Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM Port (COM9)
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6753_S00
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 3 GB DRAM
----------------------------------------------------
EMMC: (116Gb+24576Mb) SAMSUNG 0x523331424d42
EMMC FW VERSION: 01:00:00:00:00:00:00:00
EMMC CID: 15010052333142 : 000000000000000000
EMMC UA SIZE: 0x3a3e00000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x3a4a00000 [14.572 GB]
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detecting high speed port, wait......
Detected : MediaTek DA USB VCOM Port (COM11)
Checking data....wait!

FORMAT EMMC FLASH : BEGIN: 0x6a00000 - LEN: 0x100000
FRP Reset Done.
Wait untill phone will start charging.
All done.
sana po makatulong sa ang reference na ito.