REFERENCE flare y3 hang on logo and frp done in nck crack

[jazz44]

Action : Format UserData.
Selected 0-By CPUM 0-By CPUMT6571_EMMC
Exe version: NCKDongle AndroidMTK 2.5.6.2
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM114)
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6580_S00
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (57Gb+8192Mb) UNKNOWN_EMMC_DEVICE
EMMC FW VERSION: 10:00:00:00:00:00:00:00
EMMC CID: F4012242697769 : 000000000000000000
EMMC UA SIZE: 0x1cd000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1cdc00000 [7.215 GB]
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detecting high speed port, wait......
Detected : MediaTek DA USB VCOM (Android) (COM115)
Detecting format adress....wait!

FORMAT EMMC FLASH : BEGIN: 0x71800000 - LEN: 0x7000000
FORMAT EMMC FLASH : BEGIN: 0x78800000 - LEN: 0x153780000
Phone can start slow at first power on
If phone stuck on logo, perform wipe from recovery.
First start can take up to 5 min on some phones.
Wait untill phone will start charging.
All done.
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Phone not detected, aborting!!!!
Get port fail.
Please reconnect phone again and retry!
Battery must be charged.
Drivers must be installed.
Boot Fail.!!!.
All done.
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM114)
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6580_S00
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (57Gb+8192Mb) UNKNOWN_EMMC_DEVICE
EMMC FW VERSION: 10:00:00:00:00:00:00:00
EMMC CID: F4012242697769 : 000000000000000000
EMMC UA SIZE: 0x1cd000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1cdc00000 [7.215 GB]
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detecting high speed port, wait......
Detected : MediaTek DA USB VCOM (Android) (COM115)
Checking data....wait!

FORMAT EMMC FLASH : BEGIN: 0x18c00000 - LEN: 0x100000
FRP Reset Done.
Wait untill phone will start charging.
All done.