Junel_05
Registered
good am po mga ka ant share ko lang po itong gawa ko kahapon
UNIT MODEL
LENOVO A788T
PROBLEM
RESTART
HISTORY
HISTORY PO NG UNIT BIGLAAN LANG DAW NAMATAY TAPOS PAG ON GANON NA
KAYA HANAP AKO NG FIRMWARE DITO SA ATING TAHANAN KASO WALA AKONG MAKITA
KAYA TRY KO KAY FAFA GOOGLE AT AYUN MAY NAKITA RIN
ITO PO
FLASHTOOL&FIRMWARE
HERE
Rom install :
1. Run the flashing ONTIM_Marvell_MultiDL.exe
3. In the window that opens, in the top left corner of the chart to find the "System" and select "Config"
4. In the other. window, tab "File Blf" click the box with three dots (…)
5. In the search box to locate the file HELN_LTE_Nontrusted_eMMC_400MHZ_1GB.blf and click "Save." .dropoff Window
6. Determination of the computer to your device: remove the battery and connect it to the PC via the USB cable while holding the volume button "+". PC detect your phone
7. Disconnect the phone from the computer and put the battery.
8. Connect the device to your PC via the USB cable while holding the volume button "+" and hold
8. In the main window, press F9. Starts flashing, release the "+"
9. We expect the end of the firmware.
After flashing put the battery and could run the phone. The first launch takes about 5-10 minutes

image hosting no account
FINISH PRODUCT

image hosting no account

image hosting no account

image hosting no account
DONE
SANA MAKATULONG
(l:0(l:0(l:0(l:0(l:0
UNIT MODEL
LENOVO A788T
PROBLEM
RESTART
HISTORY
HISTORY PO NG UNIT BIGLAAN LANG DAW NAMATAY TAPOS PAG ON GANON NA
KAYA HANAP AKO NG FIRMWARE DITO SA ATING TAHANAN KASO WALA AKONG MAKITA
KAYA TRY KO KAY FAFA GOOGLE AT AYUN MAY NAKITA RIN
ITO PO
FLASHTOOL&FIRMWARE
HERE
Rom install :
1. Run the flashing ONTIM_Marvell_MultiDL.exe
3. In the window that opens, in the top left corner of the chart to find the "System" and select "Config"
4. In the other. window, tab "File Blf" click the box with three dots (…)
5. In the search box to locate the file HELN_LTE_Nontrusted_eMMC_400MHZ_1GB.blf and click "Save." .dropoff Window
6. Determination of the computer to your device: remove the battery and connect it to the PC via the USB cable while holding the volume button "+". PC detect your phone
7. Disconnect the phone from the computer and put the battery.
8. Connect the device to your PC via the USB cable while holding the volume button "+" and hold
8. In the main window, press F9. Starts flashing, release the "+"
9. We expect the end of the firmware.
After flashing put the battery and could run the phone. The first launch takes about 5-10 minutes

image hosting no account
FINISH PRODUCT

image hosting no account

image hosting no account

image hosting no account
DONE
SANA MAKATULONG
(l:0(l:0(l:0(l:0(l:0
-------------------------------------------
https://www.facebook.com/NELTECH1998
ANTCARAGA