Galaxy Tab P6800 No Power Done ; CWM Install and Root...[Reference]

[solenn]

Galaxy Tab P6800 No Power Done ; CWM Install and Root...[Reference]

TABLET STATUS:

Hindi nagpopower on,
tried to hard reset using combination buttons
pero no luck pa rin. Auto shutdown during wiping process.

PROCEDURE:

1. Download firmware P6800DXMD3_P6800OLBMD3_THL_Android_4.1.2.oct from support.

2. Put GT-P6800 tab into download mode:
---- Reconnect phone battery.
---- Press and hold "Volume - " + "Power" buttons.
---- Connect to pc.

3. Open Octopus Samsung Software:
---- Select the downloaded firmware
---- Click "Write Firmware" button

4. Wait until done.

[/URL][/IMG]


Welcome to Octoplus/Octopus Box Samsung software version 1.5.6
-----------------------------------------------------------------------------------
To connect GT-I9300 phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->Developer options.
3. Turn on "USB Debugging" option.
4. When message is appear press "Yes".
5. Connect usb cable to phone.
6. Go to dial window.
7. Enter *#9090# number.
8. Set speed to 115200.
9. Reboot phone.
10. Press "Read Info" in software.
Selected firmware file: P6800DXMD3_P6800OLBMD3_THL_Android_
4.1.2.oct
Please switch your phone to the download mode and connect it to a
PC.
To put GT-P6800 phone into download mode you have to perform the
following steps:
1. Reconnect phone battery.
2. Press and hold "Volume - " + "Power" buttons.
Found phone on
Firmware write started.
Writing CACHE section...
CACHE section has been written successfully.
Writing FACTORYFS section...
FACTORYFS section has been written successfully.
Writing HIDDEN section...
HIDDEN section has been written successfully.
Writing MODEM section...
MODEM section has been written successfully.
Writing RECOVERY section...
RECOVERY section has been written successfully.
Writing SBL1 section...
SBL1 section has been written successfully.
Writing KERNEL section...
KERNEL section has been written successfully.
Firmware riting successfully completed.


After flashing tablet install CWM Recovery and Rooting

FILES NEEDED:

Odin3-v3.07

cwm-6.0.3.0-p6800

SuperSU-v1.25+

1. Flash cwm-6.0.3.0-p6800 using Odin3-v3.07 on PDA tab.

2. Put SuperSU-v1.25+ to SD Card.

3. Reboot tab in recovery mode ( Volume Up + Power )

4. Install SuperSU-v1.25+.

5. Reboot tab and your done.

 

[lopnainitsuga]

boss san madodownload ung file?

 

[mc]