Gd510 unlock done
using GW300 RJ45 cable
phone must be on
Connect phone to cable-phone must be ON, if phone can't be powered
connect it OFF and press Power ON and keep it pressed until
bootloader will start ... OK
----------------------------------------------------------
Loading primary loader ... OK
Loading secondary loader ... OK
Changing baudrate ... OK
Setting bus ... OK
Loading certificate ... OK
----------------------------------------------------------
Reading phone info ... OK
----------------------------------------------------------
Reading sim unlock code... OK
Sim unlock code : 9997 3025 8432 0996
======== Process completed ========
Operation time - 00:01
----------------------------------------------------------
For operation finishing,do next :
- power phone ON without SIM
- type 2945#*510# to enter unlock menu
- enter unlock code : 9997 3025 8432 0996
Port USB - RS232 by Vygisoft disconnected
using GW300 RJ45 cable
phone must be on
Connect phone to cable-phone must be ON, if phone can't be powered
connect it OFF and press Power ON and keep it pressed until
bootloader will start ... OK
----------------------------------------------------------
Loading primary loader ... OK
Loading secondary loader ... OK
Changing baudrate ... OK
Setting bus ... OK
Loading certificate ... OK
----------------------------------------------------------
Reading phone info ... OK
----------------------------------------------------------
Reading sim unlock code... OK
Sim unlock code : 9997 3025 8432 0996
======== Process completed ========
Operation time - 00:01
----------------------------------------------------------
For operation finishing,do next :
- power phone ON without SIM
- type 2945#*510# to enter unlock menu
- enter unlock code : 9997 3025 8432 0996
Port USB - RS232 by Vygisoft disconnected