GT-I9020T Samsung (Google Nexus S) Hang Solve via Flashing...[Reference]

[solenn]

GT-I9020T Samsung (Google Nexus S) Hang Solve via Flashing...[Reference]

​

GT-I9020T Samsung (Google Nexus S) Hang Solve via Flashing

[URL="http://img829.imageshack.us/img829/5574/sg2r.jpg"][URL="http://img829.imageshack.us/img829/5574/sg2r.jpg"][/URL][/URL]​

Open Octopus Samsung
Select I9020
Hold Volume Up and Down
Connect Usb Cable
Install Driver if Needed
Load Firmware
Now Click Write Firmware
Wait Until Finish ​

[URL="http://img208.imageshack.us/img208/1189/ovjf.jpg"][URL="http://img208.imageshack.us/img208/1189/ovjf.jpg"][/URL][/URL]​

Welcome to Octoplus/Octopus Box Samsung software version 1.4.1
-----------------------------------------------------------------------------------
To connect GT-I9020 phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->Applications->Development.
3. Turn on "USB Debugging" option.
4. When the message appears press "Yes".
5. Connect USB cable to the phone.
6. Press "Read Info" in software.
Selected firmware file: I9020XXJK1- GRH78.oct
Please switch your phone to the download mode and connect it to a
PC.
To put GT-I9020 phone into download mode you have to perform the
following steps:
1. Reconnect phone battery.
2. Press and hold "Volume + " + "Volume -" buttons.
3. Insert usb cable.
Found phone on
Firmware write started.
Writing IPBL section...
IPBL section has been written successfully.
Writing BOOT section...
BOOT section has been written successfully.
Writing RECOVERY section...
RECOVERY section has been written successfully.​

Writing SYSTEM section...
SYSTEM section has been written successfully.
Writing USERDATA section...
USERDATA section has been written successfully.
Writing DGS section...
DGS section has been written successfully.
Firmware writing successfully completed.​

​