- Joined
- Oct 30, 2014
- Messages
- 1,127
- Reaction score
- 19
- Points
- 181
EasyJtag Suite Classic ver.: 2.4.1.1 / wxWidgets 3.1.0-W-U started.
Operating system ver.: Windows 7 (build 7600), 64-bit edition.
undefined
Android Explorer ver.: 1.0.0.11
eMMC ODIN ver.: 1.0.11.11
Successfully connected to box on COM26
Box S/N: 040170124137F9C6, ,FW Ver.: 01.55
Box Working Mode: JTAG Box.
Box Drivers version: 3.0.1.0, are OK
Z3X Card Serial : AA76-C170 , ver: 22
Z3X Card Activation [LG] : NOT ACTIVATED
Z3X Card Activation [SAMS] : NOT ACTIVATED
Z3X Card Activation [JTAG] : ACTIVATED
Z3X EasyJtag Software ver. 2.4.1.1
Loading eMMC Addon Firmware... IO: 2800 mV
Box S/N: 040170124137F9C6, ,FW Ver.: 01.55
CMD Pullup Level:732 mV
CMD Active Level:2165 mV
Box IO Level:2800 mV
CLK Rate:7000 khz
HiPower mode is off!
---------- eMMC Device Information ----------
EMMC CID : 1501003030303030300C201301281062
EMMC CSD : D02701320F5903FFF6DBFFFF8E40406C
EMMC Manufacturer ID: 0015 , OEM ID: 0100
EMMC Date: 01/2013 Rev.0xC
EMMC NAME: 000000 , S/N: 538116392
EMMC NAME (HEX): 30303030303000
EMMC ROM1 (Main User Data) Capacity: 15028 MB
EMMC ROM2 (Boot Partition 1) Capacity: 0 kB
EMMC ROM3 (Boot Partition 2) Capacity: 0 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 0 kB
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
EMMC Password Locked: No
Extended CSD rev 1.6 (MMC 4.5)
Boot configuration [PARTITION_CONFIG: 0x00] No boot partition configured.
Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x00.
H/W reset function [RST_N_FUNCTION]: 0x00
High-capacity W protect group size [HC_WP_GRP_SIZE: 0x00000000]
Partitioning Support [PARTITIONING_SUPPORT]: 0x07
Device support partitioning feature
Device can have enhanced tech.
Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00
---------------------------------------------
Backup saved: 000000_ 538116392_20161107_1213.extcsd
Done.
Running:SAMSUNG: MoviNAND Factory Reset...
Skip loading eMMC Addon Firmware
CMD Pullup Level:732 mV
CMD Active Level:2165 mV
Box IO Level:2800 mV
CLK Rate:7000 khz
Sending Smart Wipe Request...
Wiping Card... Please do not touch it!
<font color="red">Please don't forget to repair extCSD from backup!</font>
Done.
Running:SAMSUNG: MoviNAND Reset + Format...
Z3X EasyJtag Software ver. 2.4.1.1
Skip loading eMMC Addon Firmware
CMD Pullup Level:732 mV
CMD Active Level:2165 mV
Box IO Level:2800 mV
CLK Rate:7000 khz
EMMC ROM2/3 (Boot Partitions) Capacity: 0 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 0 kB
Sending Internal Reconfiguration Request...
Waiting configuration Apply!
Restoring configuration...
EMMC ROM2/3 (Boot Partitions) Capacity: 0 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 0 kB
Wiping Card... Please do not touch it!
<font color="red">Please don't forget to repair extCSD from backup!</font>
Done.
Running:SAMSUNG: eMMC firmware update...
Confirmed eMMC Part Number: KMVTU000LM-B503
Z3X EasyJtag Software ver. 2.4.1.1
Loading eMMC Addon Firmware... IO: 2800 mV
Box S/N: 040170124137F9C6, ,FW Ver.: 01.55
<font color="red">Warning: CMD Pullup Level (732 mV) too low , check cables etc.!</font>
CMD Active Level:2258 mV
Box IO Level:2800 mV
CLK Rate:140000 khz
Setup firmware update mode, wait 2..30 sec...
Success!
Sending eMMC firmware...
Success!
Verifying eMMC firmware...
Success!
Flashing eMMC firmware...
Success!
Repairing eMMC CID...
Success!
<font color="green">eMMC firmware is updated now! </font>
<font color="green">Please reconnect all eMMC lines before next operation!</font>
<font color="green">Please don't forget to repair <b>extCSD</b> from backup!</font>
<font color="green">Please don't forget to configure <b>BOOT</b> sizes!</font>
Done.
Z3X EasyJtag Software ver. 2.4.1.1
Loading eMMC Addon Firmware... IO: 2800 mV
Box S/N: 040170124137F9C6, ,FW Ver.: 01.55
CMD Pullup Level:732 mV
CMD Active Level:2258 mV
Box IO Level:2800 mV
CLK Rate:7000 khz
HiPower mode is off!
---------- eMMC Device Information ----------
EMMC CID : 1501005654553030300C20138686416E
EMMC CSD : D02701320F5903FFF6DBFFFF8E40406C
EMMC Manufacturer ID: 0015 , OEM ID: 0100
EMMC Date: 04/2014 Rev.0xC
EMMC NAME: VTU000 , S/N: 538150534
EMMC NAME (HEX): 56545530303000
EMMC ROM1 (Main User Data) Capacity: 15028 MB
EMMC ROM2 (Boot Partition 1) Capacity: 2048 kB
EMMC ROM3 (Boot Partition 2) Capacity: 2048 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
EMMC Password Locked: No
Extended CSD rev 1.6 (MMC 4.5)
Boot configuration [PARTITION_CONFIG: 0x00] No boot partition configured.
Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x00.
H/W reset function [RST_N_FUNCTION]: 0x00
High-capacity W protect group size [HC_WP_GRP_SIZE: 0x00000000]
Partitioning Support [PARTITIONING_SUPPORT]: 0x07
Device support partitioning feature
Device can have enhanced tech.
Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00
---------------------------------------------
Backup saved: VTU000_ 538150534_20161107_1220.extcsd
Done.
Z3X EasyJtag Software ver. 2.4.1.1
Loading eMMC Addon Firmware... IO: 2800 mV
Box S/N: 040170124137F9C6, ,FW Ver.: 01.55
CMD Pullup Level:732 mV
CMD Active Level:2258 mV
Box IO Level:2800 mV
CLK Rate:7000 khz
HiPower mode is off!
---------- eMMC Device Information ----------
EMMC CID : 1501005654553030300C20138686416E
EMMC CSD : D02701320F5903FFF6DBFFFF8E40406C
EMMC Manufacturer ID: 0015 , OEM ID: 0100
EMMC Date: 04/2014 Rev.0xC
EMMC NAME: VTU000 , S/N: 538150534
EMMC NAME (HEX): 56545530303000
EMMC ROM1 (Main User Data) Capacity: 15028 MB
EMMC ROM2 (Boot Partition 1) Capacity: 2048 kB
EMMC ROM3 (Boot Partition 2) Capacity: 2048 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
EMMC Password Locked: No
Extended CSD rev 1.6 (MMC 4.5)
Boot configuration [PARTITION_CONFIG: 0x00] No boot partition configured.
Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x00.
H/W reset function [RST_N_FUNCTION]: 0x00
High-capacity W protect group size [HC_WP_GRP_SIZE: 0x00000000]
Partitioning Support [PARTITIONING_SUPPORT]: 0x07
Device support partitioning feature
Device can have enhanced tech.
Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00
---------------------------------------------
Backup saved: VTU000_ 538150534_20161107_1238.extcsd
Done.
extCSD file...C:\Program Files\Z3X\EASYJTAG\Backups\000000_ 538116392_20161107_1213.extcsd
Running:Repair extCSD...
Z3X EasyJtag Software ver. 2.4.1.1
Skip loading eMMC Addon Firmware
CMD Pullup Level:732 mV
CMD Active Level:2258 mV
Box IO Level:2800 mV
CLK Rate:7000 khz
Writing...
Done.
Checking NAND Image : C:\Users\BigBadWolf\Desktop\N7100_Rom1_Alive_Dump_BN.bin
File successefuly loaded!
extCSD Are not selected , skip writing extCSD
Processing file...C:\Users\BigBadWolf\Desktop\N7100_Rom1_Alive_Dump_BN.bin
ROM2 Are not selected , skip writing ROM2
ROM3 Are not selected , skip writing ROM3
Z3X EasyJtag Software ver. 2.4.1.1
Skip loading eMMC Addon Firmware
CMD Pullup Level:732 mV
CMD Active Level:2258 mV
Input file : C:\Users\BigBadWolf\Desktop\N7100_Rom1_Alive_Dump_BN.bin
Writing 0020000000 bytes to 00000000 ...ROM1 (USER ROM)
Full Verify Enabled!
Done. Write Speed: 758 kB/s
Checking NAND Image : C:\Users\BigBadWolf\Desktop\EMMC_00000000_00200000.bin
File successefuly loaded!
extCSD Are not selected , skip writing extCSD
ROM1 Are not selected , skip writing ROM1
Processing file...C:\Users\BigBadWolf\Desktop\EMMC_00000000_00200000.bin
ROM3 Are not selected , skip writing ROM3
Z3X EasyJtag Software ver. 2.4.1.1
Skip loading eMMC Addon Firmware
CMD Pullup Level:732 mV
CMD Active Level:2258 mV
Input file : C:\Users\BigBadWolf\Desktop\EMMC_00000000_00200000.bin
Writing 0000200000 bytes to 00000000 ...ROM2 (BOOT1 ROM)
Full Verify Enabled!
Done. Write Speed: 422 kB/s
THANKS
Operating system ver.: Windows 7 (build 7600), 64-bit edition.
undefined
Android Explorer ver.: 1.0.0.11
eMMC ODIN ver.: 1.0.11.11
Successfully connected to box on COM26
Box S/N: 040170124137F9C6, ,FW Ver.: 01.55
Box Working Mode: JTAG Box.
Box Drivers version: 3.0.1.0, are OK
Z3X Card Serial : AA76-C170 , ver: 22
Z3X Card Activation [LG] : NOT ACTIVATED
Z3X Card Activation [SAMS] : NOT ACTIVATED
Z3X Card Activation [JTAG] : ACTIVATED
Z3X EasyJtag Software ver. 2.4.1.1
Loading eMMC Addon Firmware... IO: 2800 mV
Box S/N: 040170124137F9C6, ,FW Ver.: 01.55
CMD Pullup Level:732 mV
CMD Active Level:2165 mV
Box IO Level:2800 mV
CLK Rate:7000 khz
HiPower mode is off!
---------- eMMC Device Information ----------
EMMC CID : 1501003030303030300C201301281062
EMMC CSD : D02701320F5903FFF6DBFFFF8E40406C
EMMC Manufacturer ID: 0015 , OEM ID: 0100
EMMC Date: 01/2013 Rev.0xC
EMMC NAME: 000000 , S/N: 538116392
EMMC NAME (HEX): 30303030303000
EMMC ROM1 (Main User Data) Capacity: 15028 MB
EMMC ROM2 (Boot Partition 1) Capacity: 0 kB
EMMC ROM3 (Boot Partition 2) Capacity: 0 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 0 kB
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
EMMC Password Locked: No
Extended CSD rev 1.6 (MMC 4.5)
Boot configuration [PARTITION_CONFIG: 0x00] No boot partition configured.
Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x00.
H/W reset function [RST_N_FUNCTION]: 0x00
High-capacity W protect group size [HC_WP_GRP_SIZE: 0x00000000]
Partitioning Support [PARTITIONING_SUPPORT]: 0x07
Device support partitioning feature
Device can have enhanced tech.
Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00
---------------------------------------------
Backup saved: 000000_ 538116392_20161107_1213.extcsd
Done.
Running:SAMSUNG: MoviNAND Factory Reset...
Skip loading eMMC Addon Firmware
CMD Pullup Level:732 mV
CMD Active Level:2165 mV
Box IO Level:2800 mV
CLK Rate:7000 khz
Sending Smart Wipe Request...
Wiping Card... Please do not touch it!
<font color="red">Please don't forget to repair extCSD from backup!</font>
Done.
Running:SAMSUNG: MoviNAND Reset + Format...
Z3X EasyJtag Software ver. 2.4.1.1
Skip loading eMMC Addon Firmware
CMD Pullup Level:732 mV
CMD Active Level:2165 mV
Box IO Level:2800 mV
CLK Rate:7000 khz
EMMC ROM2/3 (Boot Partitions) Capacity: 0 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 0 kB
Sending Internal Reconfiguration Request...
Waiting configuration Apply!
Restoring configuration...
EMMC ROM2/3 (Boot Partitions) Capacity: 0 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 0 kB
Wiping Card... Please do not touch it!
<font color="red">Please don't forget to repair extCSD from backup!</font>
Done.
Running:SAMSUNG: eMMC firmware update...
Confirmed eMMC Part Number: KMVTU000LM-B503
Z3X EasyJtag Software ver. 2.4.1.1
Loading eMMC Addon Firmware... IO: 2800 mV
Box S/N: 040170124137F9C6, ,FW Ver.: 01.55
<font color="red">Warning: CMD Pullup Level (732 mV) too low , check cables etc.!</font>
CMD Active Level:2258 mV
Box IO Level:2800 mV
CLK Rate:140000 khz
Setup firmware update mode, wait 2..30 sec...
Success!
Sending eMMC firmware...
Success!
Verifying eMMC firmware...
Success!
Flashing eMMC firmware...
Success!
Repairing eMMC CID...
Success!
<font color="green">eMMC firmware is updated now! </font>
<font color="green">Please reconnect all eMMC lines before next operation!</font>
<font color="green">Please don't forget to repair <b>extCSD</b> from backup!</font>
<font color="green">Please don't forget to configure <b>BOOT</b> sizes!</font>
Done.
Z3X EasyJtag Software ver. 2.4.1.1
Loading eMMC Addon Firmware... IO: 2800 mV
Box S/N: 040170124137F9C6, ,FW Ver.: 01.55
CMD Pullup Level:732 mV
CMD Active Level:2258 mV
Box IO Level:2800 mV
CLK Rate:7000 khz
HiPower mode is off!
---------- eMMC Device Information ----------
EMMC CID : 1501005654553030300C20138686416E
EMMC CSD : D02701320F5903FFF6DBFFFF8E40406C
EMMC Manufacturer ID: 0015 , OEM ID: 0100
EMMC Date: 04/2014 Rev.0xC
EMMC NAME: VTU000 , S/N: 538150534
EMMC NAME (HEX): 56545530303000
EMMC ROM1 (Main User Data) Capacity: 15028 MB
EMMC ROM2 (Boot Partition 1) Capacity: 2048 kB
EMMC ROM3 (Boot Partition 2) Capacity: 2048 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
EMMC Password Locked: No
Extended CSD rev 1.6 (MMC 4.5)
Boot configuration [PARTITION_CONFIG: 0x00] No boot partition configured.
Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x00.
H/W reset function [RST_N_FUNCTION]: 0x00
High-capacity W protect group size [HC_WP_GRP_SIZE: 0x00000000]
Partitioning Support [PARTITIONING_SUPPORT]: 0x07
Device support partitioning feature
Device can have enhanced tech.
Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00
---------------------------------------------
Backup saved: VTU000_ 538150534_20161107_1220.extcsd
Done.
Z3X EasyJtag Software ver. 2.4.1.1
Loading eMMC Addon Firmware... IO: 2800 mV
Box S/N: 040170124137F9C6, ,FW Ver.: 01.55
CMD Pullup Level:732 mV
CMD Active Level:2258 mV
Box IO Level:2800 mV
CLK Rate:7000 khz
HiPower mode is off!
---------- eMMC Device Information ----------
EMMC CID : 1501005654553030300C20138686416E
EMMC CSD : D02701320F5903FFF6DBFFFF8E40406C
EMMC Manufacturer ID: 0015 , OEM ID: 0100
EMMC Date: 04/2014 Rev.0xC
EMMC NAME: VTU000 , S/N: 538150534
EMMC NAME (HEX): 56545530303000
EMMC ROM1 (Main User Data) Capacity: 15028 MB
EMMC ROM2 (Boot Partition 1) Capacity: 2048 kB
EMMC ROM3 (Boot Partition 2) Capacity: 2048 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
EMMC Password Locked: No
Extended CSD rev 1.6 (MMC 4.5)
Boot configuration [PARTITION_CONFIG: 0x00] No boot partition configured.
Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x00.
H/W reset function [RST_N_FUNCTION]: 0x00
High-capacity W protect group size [HC_WP_GRP_SIZE: 0x00000000]
Partitioning Support [PARTITIONING_SUPPORT]: 0x07
Device support partitioning feature
Device can have enhanced tech.
Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00
---------------------------------------------
Backup saved: VTU000_ 538150534_20161107_1238.extcsd
Done.
extCSD file...C:\Program Files\Z3X\EASYJTAG\Backups\000000_ 538116392_20161107_1213.extcsd
Running:Repair extCSD...
Z3X EasyJtag Software ver. 2.4.1.1
Skip loading eMMC Addon Firmware
CMD Pullup Level:732 mV
CMD Active Level:2258 mV
Box IO Level:2800 mV
CLK Rate:7000 khz
Writing...
Done.
Checking NAND Image : C:\Users\BigBadWolf\Desktop\N7100_Rom1_Alive_Dump_BN.bin
File successefuly loaded!
extCSD Are not selected , skip writing extCSD
Processing file...C:\Users\BigBadWolf\Desktop\N7100_Rom1_Alive_Dump_BN.bin
ROM2 Are not selected , skip writing ROM2
ROM3 Are not selected , skip writing ROM3
Z3X EasyJtag Software ver. 2.4.1.1
Skip loading eMMC Addon Firmware
CMD Pullup Level:732 mV
CMD Active Level:2258 mV
Input file : C:\Users\BigBadWolf\Desktop\N7100_Rom1_Alive_Dump_BN.bin
Writing 0020000000 bytes to 00000000 ...ROM1 (USER ROM)
Full Verify Enabled!
Done. Write Speed: 758 kB/s
Checking NAND Image : C:\Users\BigBadWolf\Desktop\EMMC_00000000_00200000.bin
File successefuly loaded!
extCSD Are not selected , skip writing extCSD
ROM1 Are not selected , skip writing ROM1
Processing file...C:\Users\BigBadWolf\Desktop\EMMC_00000000_00200000.bin
ROM3 Are not selected , skip writing ROM3
Z3X EasyJtag Software ver. 2.4.1.1
Skip loading eMMC Addon Firmware
CMD Pullup Level:732 mV
CMD Active Level:2258 mV
Input file : C:\Users\BigBadWolf\Desktop\EMMC_00000000_00200000.bin
Writing 0000200000 bytes to 00000000 ...ROM2 (BOOT1 ROM)
Full Verify Enabled!
Done. Write Speed: 422 kB/s
THANKS