Good afternon po mga ka ant....
Help naman po Samsung SM-G360P..
Na unlock po piro walang signal... LTE/CDMA lang po lalabas sa NETWORK MODE..
Ito po logs nya Z3X..
UNLOCK INSTRUCTIONS:
Direct Unlock:
1. Phone must be powered on.
2. Type *#0808# and select 'DM+MODEM+ADB'.
3. Type *#9090# and choose 'DM/DUN over HSIC'.
4. Reboot phone.
Or use 'Activate Diag' function from 'Repair' tab.
5. Connect USB cable, install drivers if needed.
6. Select Samsung diagnostic port in port settings.
7. Press 'Unlock' button and select 'Unlock' option.
Domestic Unlock:
1. Power on the phone.
2. Enable 'USB debugging' in 'Settings'-'Developer options',
tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options'.
3. Connect the phone to PC with USB cable, install drivers if needed.
5. Select device in ADB settings.
6. Press 'Unlock' button and select 'Domestic unlock' option.
Operation: Unlock
Selected model: SM-G360P
Selected port: COM29 SAMSUNG Mobile USB Serial Port
Software version: 28.1
Waiting ADB device... Ok
Reading phone info...
Model: SM-G360P
Android version: 4.4.4
Product code: Not Active
Phone version: G360PVPU2APJ2
PDA version: G360PVPU2APJ2
CSC version: G360PSPT2APJ2
CSC country code: USA
CSC sales code: BST
HW version: G360P.03
Phone SN: 00000000000
Modem board: MSM8916
RF cal date: 2015.08.24
IMEI: 99000582919534
Writing AT RIL... Ok
Initialization AT RIL... Ok
Unlocking... Ok
Rebooting phone... Ok
Unlock done
Done with Samsung Tool PRO v.28.1
Help naman po Samsung SM-G360P..
Na unlock po piro walang signal... LTE/CDMA lang po lalabas sa NETWORK MODE..
Ito po logs nya Z3X..
UNLOCK INSTRUCTIONS:
Direct Unlock:
1. Phone must be powered on.
2. Type *#0808# and select 'DM+MODEM+ADB'.
3. Type *#9090# and choose 'DM/DUN over HSIC'.
4. Reboot phone.
Or use 'Activate Diag' function from 'Repair' tab.
5. Connect USB cable, install drivers if needed.
6. Select Samsung diagnostic port in port settings.
7. Press 'Unlock' button and select 'Unlock' option.
Domestic Unlock:
1. Power on the phone.
2. Enable 'USB debugging' in 'Settings'-'Developer options',
tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options'.
3. Connect the phone to PC with USB cable, install drivers if needed.
5. Select device in ADB settings.
6. Press 'Unlock' button and select 'Domestic unlock' option.
Operation: Unlock
Selected model: SM-G360P
Selected port: COM29 SAMSUNG Mobile USB Serial Port
Software version: 28.1
Waiting ADB device... Ok
Reading phone info...
Model: SM-G360P
Android version: 4.4.4
Product code: Not Active
Phone version: G360PVPU2APJ2
PDA version: G360PVPU2APJ2
CSC version: G360PSPT2APJ2
CSC country code: USA
CSC sales code: BST
HW version: G360P.03
Phone SN: 00000000000
Modem board: MSM8916
RF cal date: 2015.08.24
IMEI: 99000582919534
Writing AT RIL... Ok
Initialization AT RIL... Ok
Unlocking... Ok
Rebooting phone... Ok
Unlock done
Done with Samsung Tool PRO v.28.1
