How to make Backup o ROM dump anumang Mediatek ( MTK ) Device ( Mga Telepono at Tablet )
Para sa lahat ng mga aparato Mediatek tulad ng MT6595 , MT6592 , MT6589 , MT6582 , MT6577 , MT6575 , MT6573 , MT6572 at sana ay para sa lahat ng iba pang MT65xx sa hinaharap hangga't ay pagkakaroon ng isang uri ng EXT4 bloke , iminumungkahi kong sundin mo ang paraan ng paggawa ng backup o ROM dump sa pamamagitan ng paggamit ng mga tool na ginawa para sa sarili Mediatek , MTK Droid Root at Mga Tool at pati na rin SP Flash Tool. Kaya, ano pa ang hinihintay ninyo ?
NOTE: Please carefully follow the instructions to avoid problems.
MGA KINAKAILANGAN :
Computer running Windows
MTK Driver ng USB
MTK Droid Root
SP Flash Tool
Scatter file ng iyong aparato - gumawa ng iyong sariling sa isang napaka- madaling paraan .
Notepad ++ - para sa pagbubukas ng scatter file. I-download ito dito .
Pagkakaroon MTK Device EXT4 bloke uri at USB cable
Preparations:
I-download at i-install ang MTK USB driver na makita sa iyong aparato kahit na sa preloader . I-download at i-extract SP Flash Tool at MTK Droid Root at Mga Tool sa anumang lokasyon sa iyong computer. Put your MTK device on USB debugging mode, go to your device Settings – Developer options to enable it. Don’t forget to prepare for the scatter file for your device. Please carefully follow the instructions below, GOODLUCK!
INSTRUCTIONS:
Ang unang bagay na kailangan nating gawin ay upang buksan ang application SP Flash Tool, patakbuhin ito sa administrator. Mula sa tool , makikita mo ang isang pindutan Scatter - load, i-click ito at buksan ang scatter file ng iyong android device.
After opening the scatter file, it will load the regions or the partitions of your android device. If you are curious why it was unchecked, it was because you haven’t backup or dump them yet.
Click on Read Back tab then click ADD once. It will add one row, click N/A on the first row. The tool will ask you where to save the file and what file name, don’t ever change the filename (if it was named as ROM_0 or ROM_1, leave the name as it is). Just go to the folder where you want to save it then click SAVE.
Ngayon, kailangan mong ipasok ang tamang address or Hex para sa Start Address at ang Haba . Paano? Hanapin ang scatter file na iyong ginawa noong nakaraan at buksan ito gamit ang Notepad ++ .
What you see next to the partition names are actually the Address of each partitions. If you want to get a partitions individually, then their length values can be found on the block info size that can be found on the MTK Droid Root and Tools. I have a separate article about this linked here.
Since our goal is to back up the whole ROM, we don’t need to get the length value from the block info, instead, use the values from the scatter file itself.
What we do now is to find the Preloader line from the scatter file and copy its value which in my case, it has a value of 0x0. We will put the Preloader’s value to the Start Address field on the SP Flash Tool.
Ang susunod na hakbang ay upang mahanap ang halaga na ipinasok sa patlang ng Haba , ito ay magiging iyong pagpipilian . Kung gusto mong i- backup o dump ang ROM mula Preloader pababa sa android sistema lamang (walang mga user- data) , pagkatapos , piliin ang halaga ng mga line Cache sa scatter file at ipasok ito sa patlang Length . Kung hindi man, kung gusto mong ganap na backup o dump ang buong ROM , piliin ang halaga ng taba ( NODL_FAT ), sa aking mga kaso nito 0x810e8000 , pagkatapos ay ipasok ito sa patlang na Haba . Suriin ang mga halaga na ipinasok mo . I-click ang OK.
Since I want to get a complete, whole, full ROM backup / dump, then I’ll choose FAT.
Turn OFF your android phone or tablet. From SP Flash Tool, click Read Back button and immediately connect you switched-OFF android device via USB cable. The tool will detect your device and it will start backing up and dumping your current ROM. It may take 20 minutes to 1 hour depending on the ROM size and the specs of your computer (mine is 1.6 Gb which takes around 30 minutes on a Dual Core processor, be sure your not running any apps aside from this tool so you won't have any interruptions).
After the download is done, you will see the sign like the image below.
Preparing the ROM backup / dump for flashing
Since we are done getting a ROM backup / dump, the next step is to prepare it and make it flashable.
Open MTK Droid Root and Tools application, run it as administrator. From the tool, click the root, backup, recovery tab. You need to disconnect the USB cable from your phone or tablet and turn it ON, when it is powered ON already, connect again your device. The tool will recognize your device and the button To process file ROM_ from Flash Tool will be enabled. Click on that button and select the ROM that we have made earlier which in my case "ROM_0".
Wait for the process to be completed, if you will be asked To automatically create CWM recovery, click YES. Read the status messages and wait for the task to complete.
If the process is done, you will now have your ROM backup or dump at the Backup folder on MTK Droid Root and Tools folder. The backup that we have processed has a filename with ForFlashtoolFromReadback, mine is Neer-A848i_130416_ForFlashtoolFromReadBack_140526-112330. Open that folder and you'll see the partitions are copied and dumped.
Restoring the ROM backup / dump
To restore or flash the ROM dump which we have made, simply open the SP Flash Tool app (run as admin), and click Scatter-loading to load the scatter file from the processed ROM, see the image just right above.
Ngayon , ang lahat ng mga rehiyon at partitions ang malo-load handa na para sa flashing.
Panganib ! Huwag subukang flash ang Preloader at ang DSP_BL dahil ito ay brick iyong aparato. Alisin ang tsek nito .
Disconnect your USB cable and turn OFF your phone or tablet, when it's already OFF, click the Download button from SP Flash Tool and immediately plug-in your switched-off device via USB cable.
sana makatulong at para narin ay may mga sariling back up tayo at makatulong magback up at ipamahigi dito
kung may katanungankayo about dito pm me e guide ko kayo..sa tingin ninyo parang mahirap nuh pero madali lang yan
Para sa lahat ng mga aparato Mediatek tulad ng MT6595 , MT6592 , MT6589 , MT6582 , MT6577 , MT6575 , MT6573 , MT6572 at sana ay para sa lahat ng iba pang MT65xx sa hinaharap hangga't ay pagkakaroon ng isang uri ng EXT4 bloke , iminumungkahi kong sundin mo ang paraan ng paggawa ng backup o ROM dump sa pamamagitan ng paggamit ng mga tool na ginawa para sa sarili Mediatek , MTK Droid Root at Mga Tool at pati na rin SP Flash Tool. Kaya, ano pa ang hinihintay ninyo ?
NOTE: Please carefully follow the instructions to avoid problems.
MGA KINAKAILANGAN :
Computer running Windows
MTK Driver ng USB
MTK Droid Root
SP Flash Tool
Scatter file ng iyong aparato - gumawa ng iyong sariling sa isang napaka- madaling paraan .
Notepad ++ - para sa pagbubukas ng scatter file. I-download ito dito .
Pagkakaroon MTK Device EXT4 bloke uri at USB cable
Preparations:
I-download at i-install ang MTK USB driver na makita sa iyong aparato kahit na sa preloader . I-download at i-extract SP Flash Tool at MTK Droid Root at Mga Tool sa anumang lokasyon sa iyong computer. Put your MTK device on USB debugging mode, go to your device Settings – Developer options to enable it. Don’t forget to prepare for the scatter file for your device. Please carefully follow the instructions below, GOODLUCK!
INSTRUCTIONS:
Ang unang bagay na kailangan nating gawin ay upang buksan ang application SP Flash Tool, patakbuhin ito sa administrator. Mula sa tool , makikita mo ang isang pindutan Scatter - load, i-click ito at buksan ang scatter file ng iyong android device.
After opening the scatter file, it will load the regions or the partitions of your android device. If you are curious why it was unchecked, it was because you haven’t backup or dump them yet.
Click on Read Back tab then click ADD once. It will add one row, click N/A on the first row. The tool will ask you where to save the file and what file name, don’t ever change the filename (if it was named as ROM_0 or ROM_1, leave the name as it is). Just go to the folder where you want to save it then click SAVE.
Ngayon, kailangan mong ipasok ang tamang address or Hex para sa Start Address at ang Haba . Paano? Hanapin ang scatter file na iyong ginawa noong nakaraan at buksan ito gamit ang Notepad ++ .
What you see next to the partition names are actually the Address of each partitions. If you want to get a partitions individually, then their length values can be found on the block info size that can be found on the MTK Droid Root and Tools. I have a separate article about this linked here.
Since our goal is to back up the whole ROM, we don’t need to get the length value from the block info, instead, use the values from the scatter file itself.
What we do now is to find the Preloader line from the scatter file and copy its value which in my case, it has a value of 0x0. We will put the Preloader’s value to the Start Address field on the SP Flash Tool.
Ang susunod na hakbang ay upang mahanap ang halaga na ipinasok sa patlang ng Haba , ito ay magiging iyong pagpipilian . Kung gusto mong i- backup o dump ang ROM mula Preloader pababa sa android sistema lamang (walang mga user- data) , pagkatapos , piliin ang halaga ng mga line Cache sa scatter file at ipasok ito sa patlang Length . Kung hindi man, kung gusto mong ganap na backup o dump ang buong ROM , piliin ang halaga ng taba ( NODL_FAT ), sa aking mga kaso nito 0x810e8000 , pagkatapos ay ipasok ito sa patlang na Haba . Suriin ang mga halaga na ipinasok mo . I-click ang OK.
Since I want to get a complete, whole, full ROM backup / dump, then I’ll choose FAT.
Turn OFF your android phone or tablet. From SP Flash Tool, click Read Back button and immediately connect you switched-OFF android device via USB cable. The tool will detect your device and it will start backing up and dumping your current ROM. It may take 20 minutes to 1 hour depending on the ROM size and the specs of your computer (mine is 1.6 Gb which takes around 30 minutes on a Dual Core processor, be sure your not running any apps aside from this tool so you won't have any interruptions).
After the download is done, you will see the sign like the image below.
Preparing the ROM backup / dump for flashing
Since we are done getting a ROM backup / dump, the next step is to prepare it and make it flashable.
Open MTK Droid Root and Tools application, run it as administrator. From the tool, click the root, backup, recovery tab. You need to disconnect the USB cable from your phone or tablet and turn it ON, when it is powered ON already, connect again your device. The tool will recognize your device and the button To process file ROM_ from Flash Tool will be enabled. Click on that button and select the ROM that we have made earlier which in my case "ROM_0".
Wait for the process to be completed, if you will be asked To automatically create CWM recovery, click YES. Read the status messages and wait for the task to complete.
If the process is done, you will now have your ROM backup or dump at the Backup folder on MTK Droid Root and Tools folder. The backup that we have processed has a filename with ForFlashtoolFromReadback, mine is Neer-A848i_130416_ForFlashtoolFromReadBack_140526-112330. Open that folder and you'll see the partitions are copied and dumped.
Restoring the ROM backup / dump
To restore or flash the ROM dump which we have made, simply open the SP Flash Tool app (run as admin), and click Scatter-loading to load the scatter file from the processed ROM, see the image just right above.
Ngayon , ang lahat ng mga rehiyon at partitions ang malo-load handa na para sa flashing.
Panganib ! Huwag subukang flash ang Preloader at ang DSP_BL dahil ito ay brick iyong aparato. Alisin ang tsek nito .
Disconnect your USB cable and turn OFF your phone or tablet, when it's already OFF, click the Download button from SP Flash Tool and immediately plug-in your switched-off device via USB cable.
sana makatulong at para narin ay may mga sariling back up tayo at makatulong magback up at ipamahigi dito
kung may katanungankayo about dito pm me e guide ko kayo..sa tingin ninyo parang mahirap nuh pero madali lang yan