magnifico23
Expired Account
share ko lang po mga boss minsan kasi ang hirap mag flash ng mga nvram lalo na kapag wala kang box ...
para yung iba hindi na mahirapan ...ito po
dito po walang nakalabas na nvram
pero kapag na edit nyo na ang scatter ito na lalabas
blanko pa po yan wag nyo muna check
click nyo muna at navigate ang nvram na na download nyo or back up nyo BIN.FILE ..
then check nyo ang NVRAM ...
para mag flash DONE ...
may mga nakita lang kasi ako sa tahanan na hirap sila maglagay ng nvram lalo na kapag bin.file..
share ko lang nalalaman ko ...
ito po step by step
1. Navigate to firmware’s folder and open the scatter file with notepad++ or with WordPad .if opened in WordPad then save is as *.txt
2. Scroll down the scatter file and find “partition_name: NVRAMâ€
3. Change the attribute of the fourth row of the nvram partition which reads “is_download: false†to “is_download: true†save and exit.
4. Launch SPFT and select this scatter and the nvram partition should be there in the download tab as follows
You can do the same for all other partitions to let them appear in the downloads tab.
5. Un thick all other partitions except the NVRAM
6. Disconnect(if device is connected ) and Turn it off remove and reinsert battery
7. Clicks download on SPFT and connect your phone via usb and wait until you see green the circle. DONE
Since the partition size of all NVRAM is the same 0x500000 you can flash any MTK phone NVRAM.bin file to any other MTK phone since the scatter type is the same MT6572 to MT6572 and MT6582 to MT6582 and so on.
You can flash any NVRAM.bin file to any mtk phones but only with the original scatter file
SANA MAKA tulong lalo na sa kagaya kung baguhan ....
yung nasa pic pala sample lang yan ...hehehe
para yung iba hindi na mahirapan ...ito po
dito po walang nakalabas na nvram
pero kapag na edit nyo na ang scatter ito na lalabas
blanko pa po yan wag nyo muna check
click nyo muna at navigate ang nvram na na download nyo or back up nyo BIN.FILE ..
then check nyo ang NVRAM ...
para mag flash DONE ...
may mga nakita lang kasi ako sa tahanan na hirap sila maglagay ng nvram lalo na kapag bin.file..
share ko lang nalalaman ko ...
ito po step by step
1. Navigate to firmware’s folder and open the scatter file with notepad++ or with WordPad .if opened in WordPad then save is as *.txt
2. Scroll down the scatter file and find “partition_name: NVRAMâ€
3. Change the attribute of the fourth row of the nvram partition which reads “is_download: false†to “is_download: true†save and exit.
4. Launch SPFT and select this scatter and the nvram partition should be there in the download tab as follows
You can do the same for all other partitions to let them appear in the downloads tab.
5. Un thick all other partitions except the NVRAM
6. Disconnect(if device is connected ) and Turn it off remove and reinsert battery
7. Clicks download on SPFT and connect your phone via usb and wait until you see green the circle. DONE
Since the partition size of all NVRAM is the same 0x500000 you can flash any MTK phone NVRAM.bin file to any other MTK phone since the scatter type is the same MT6572 to MT6572 and MT6582 to MT6582 and so on.
You can flash any NVRAM.bin file to any mtk phones but only with the original scatter file
SANA MAKA tulong lalo na sa kagaya kung baguhan ....
yung nasa pic pala sample lang yan ...hehehe
Last edited by a moderator:
