acidwater15
Registered
- Joined
- May 6, 2016
- Messages
- 94
- Reaction score
- 0
- Points
- 1
How to format corrupted USB or SD Card using CMD..
1.go to windows
2.type CMD and run as Administrator and enter.
3.type "diskpart" and enter.
4.type "list disk" and enter.
5.type "select disk #" (number of your disk but do not select disk 0 because it's the computer storage..just disk 1 or sometimes disk 2 if neccessary) and enter.
6.type "clean" and enter.
7.type "create partition primary" and enter.
8.type "select partition 1" and enter.
9.type "active" and enter.
10.type "format fs = fat32 quick" and enter.
11.type "assign" and enter.
12.type "exit" and enter.
and you're done..
1.go to windows
2.type CMD and run as Administrator and enter.
3.type "diskpart" and enter.
4.type "list disk" and enter.
5.type "select disk #" (number of your disk but do not select disk 0 because it's the computer storage..just disk 1 or sometimes disk 2 if neccessary) and enter.
6.type "clean" and enter.
7.type "create partition primary" and enter.
8.type "select partition 1" and enter.
9.type "active" and enter.
10.type "format fs = fat32 quick" and enter.
11.type "assign" and enter.
12.type "exit" and enter.
and you're done..