HTC Dash 3G unlocked by Riff box
procedure
Ø Solder JTAG cable to HTC Dash JTAG pads;
Ø Make sure HTC Dash is selected in the list of models;
Ø Insert battery and connect USB Cable;
Ø Click Resurrect button;
Ø Wait till software signals a successful operation completion;
Ø Disconnect power supply, de-solder JTAG wires;
Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.21, JTAG Manager Version: 1.29
Selected Resurrector: [HTC Dash]
Connecting to the dead body...OK
Detected dead body ID: 0x901B10E1 - CORRECT!
Set I/O Voltage reads as 2.59V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]
Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK
Detected an Initialized FLASH1 Chip ID: 0x002C/0x55BA (256MB)
Unlocking the Phone...OK
Unlock complete!
procedure
Ø Solder JTAG cable to HTC Dash JTAG pads;
Ø Make sure HTC Dash is selected in the list of models;
Ø Insert battery and connect USB Cable;
Ø Click Resurrect button;
Ø Wait till software signals a successful operation completion;
Ø Disconnect power supply, de-solder JTAG wires;
Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.21, JTAG Manager Version: 1.29
Selected Resurrector: [HTC Dash]
Connecting to the dead body...OK
Detected dead body ID: 0x901B10E1 - CORRECT!
Set I/O Voltage reads as 2.59V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]
Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK
Detected an Initialized FLASH1 Chip ID: 0x002C/0x55BA (256MB)
Unlocking the Phone...OK
Unlock complete!