P
prinz07
Anonymous
Problem-
Dead Tablet, No Power will not charge, will not turn on.
Cause -
The pin if broken in the microExt USB port.
Diagnose-
The microExt USB port (+) POS pin is pushed back. Instead of making contact with the cable when inserted, the pin is forced back into the connector. Essentially bending and folding into the connector. This sometimes happens with other pins such as the (-) NEG pin. If it happens with a data pin, no data or sync is possible, but the unit will charge.
Solution -
Final before closing up- cover with black electrical tape
Replace with an inverted microUSB port. This port is readily available, and can be adapted to supply power to the tablet.
Dead Tablet, No Power will not charge, will not turn on.
Cause -
The pin if broken in the microExt USB port.
Diagnose-
The microExt USB port (+) POS pin is pushed back. Instead of making contact with the cable when inserted, the pin is forced back into the connector. Essentially bending and folding into the connector. This sometimes happens with other pins such as the (-) NEG pin. If it happens with a data pin, no data or sync is possible, but the unit will charge.
Solution -
Final before closing up- cover with black electrical tape
Replace with an inverted microUSB port. This port is readily available, and can be adapted to supply power to the tablet.
Conclusion -
This fixes the charge issue, but data transfer and sync can only be done via microSD card, or wireless, or via Bluetooth.
done-
This fixes the charge issue, but data transfer and sync can only be done via microSD card, or wireless, or via Bluetooth.
done-
