Huawei Ascend Y221-U22 Logo Only Done Via Update Sd Card
Procedure:
1.copy ****.zip to root folder of the phone SD card (no need to unzip).
2.Turn off the phone, then keep pressing power button and volume+ button until the robot icon appear, then press power button again and it will show as below
3.Press the volume- to move up and down to choose“wipe data/factory resetâ€, then press volume+ button to confirm.
4.Choose “yes—delete all user dataâ€, then press volume+ button to enter the page as below.
5.It will enter below page after finishing delete all user data.
6.Then choose“apply update from sdcardâ€
7.Find and select the ROM, press volume+ to enter the page as below.
8.Please make sure the power is sufficient during the upgrading. It will showed as below when the upgrading finished.
9.Choose “reboot system nowâ€,then press volume+ button to reboot your phone.
Firmware:
http://www.needrom.com/download/huawei-y221-u22
Done:
Procedure:
1.copy ****.zip to root folder of the phone SD card (no need to unzip).
2.Turn off the phone, then keep pressing power button and volume+ button until the robot icon appear, then press power button again and it will show as below
3.Press the volume- to move up and down to choose“wipe data/factory resetâ€, then press volume+ button to confirm.
4.Choose “yes—delete all user dataâ€, then press volume+ button to enter the page as below.
5.It will enter below page after finishing delete all user data.
6.Then choose“apply update from sdcardâ€
7.Find and select the ROM, press volume+ to enter the page as below.
8.Please make sure the power is sufficient during the upgrading. It will showed as below when the upgrading finished.
9.Choose “reboot system nowâ€,then press volume+ button to reboot your phone.
Firmware:
http://www.needrom.com/download/huawei-y221-u22
Done: