Huawei ascend Y300 digicel unlock done
Unlocking Bootloader:::::::
Unlock Huawei bootloader:
Select "Qualcomm" platform from the tab menu in the upper left side of the software
Go to "Service" tab
Set the phone to Download mode..
how to Download Mode:
Switch the device OFF
Remove the flash card from the phone
Press and hold down Vol -, Vol + buttons simultaneously,
then press and hold Power until your phone completely freezes on the pink screen
When the phone is in "Download mode" you need to connect it to computer and install usb driver
required driver (only if the phone is connected for the first time).
Unlocking NCK code::::::::::
How to fast boot:
Switch the device OFF
Remove the battery and hold it removed for 10 seconds, then place it back
Press and hold down Vol -, Menu and Power buttons simultaneously until your
phone completely freezes..
it should be like this:
SigmaKey 1.28.05
773364900 Sigma dongle 1.30, Initializing...OK
SigmaKey 1.28.05 Qcom: Unlock Huawei bootloader
DBAdapter Reserved Interface (COM170), Provider: Huawei Incorporated, Driver ver.: 2.0.6.601, Date: 2/3/2010, USB\Vid_12d1&Pid_1035&Rev_0100&MI_04
Version: 8X25-2030-SSNSKOLYM
Detecting flash...eMMC, Flash size: 3.69 Gb
IMEI: 868438014367570
Bluetooth address: E4AA7BA56924
WiFi address: DFB07BA56924
Security area saved to "D:\Documents and Settings\JUBAl\My Documents\SigmaKey\security backup\868438014367570_8X25-2030-SSNSKOLYM.skb"
Unlocking bootloader....Done
Restarting phone...Done
SigmaKey 1.28.05 Qcom: Direct unlock
DBAdapter Reserved Interface (COM170), Provider: Huawei Incorporated, Driver ver.: 2.0.6.601, Date: 2/3/2010, USB\Vid_12d1&Pid_1035&Rev_0100&MI_04
Version: 8X25-2030-SSNSKOLYM
Detecting flash...eMMC, Flash size: 3.69 Gb
IMEI: 868438014367570
Bluetooth address: E4AA7BA56924
WiFi address: DFB07BA56924
Security area saved to "D:\Documents and Settings\JUBAl\My Documents\SigmaKey\security backup\868438014367570_8X25-2030-SSNSKOLYM (0).skb"
Unlocking phone...Done
Restarting phone...Done
Unlocking Bootloader:::::::
Unlock Huawei bootloader:
Select "Qualcomm" platform from the tab menu in the upper left side of the software
Go to "Service" tab
Set the phone to Download mode..
how to Download Mode:
Switch the device OFF
Remove the flash card from the phone
Press and hold down Vol -, Vol + buttons simultaneously,
then press and hold Power until your phone completely freezes on the pink screen
When the phone is in "Download mode" you need to connect it to computer and install usb driver
required driver (only if the phone is connected for the first time).
Unlocking NCK code::::::::::
How to fast boot:
Switch the device OFF
Remove the battery and hold it removed for 10 seconds, then place it back
Press and hold down Vol -, Menu and Power buttons simultaneously until your
phone completely freezes..
it should be like this:
SigmaKey 1.28.05
773364900 Sigma dongle 1.30, Initializing...OK
SigmaKey 1.28.05 Qcom: Unlock Huawei bootloader
DBAdapter Reserved Interface (COM170), Provider: Huawei Incorporated, Driver ver.: 2.0.6.601, Date: 2/3/2010, USB\Vid_12d1&Pid_1035&Rev_0100&MI_04
Version: 8X25-2030-SSNSKOLYM
Detecting flash...eMMC, Flash size: 3.69 Gb
IMEI: 868438014367570
Bluetooth address: E4AA7BA56924
WiFi address: DFB07BA56924
Security area saved to "D:\Documents and Settings\JUBAl\My Documents\SigmaKey\security backup\868438014367570_8X25-2030-SSNSKOLYM.skb"
Unlocking bootloader....Done
Restarting phone...Done
SigmaKey 1.28.05 Qcom: Direct unlock
DBAdapter Reserved Interface (COM170), Provider: Huawei Incorporated, Driver ver.: 2.0.6.601, Date: 2/3/2010, USB\Vid_12d1&Pid_1035&Rev_0100&MI_04
Version: 8X25-2030-SSNSKOLYM
Detecting flash...eMMC, Flash size: 3.69 Gb
IMEI: 868438014367570
Bluetooth address: E4AA7BA56924
WiFi address: DFB07BA56924
Security area saved to "D:\Documents and Settings\JUBAl\My Documents\SigmaKey\security backup\868438014367570_8X25-2030-SSNSKOLYM (0).skb"
Unlocking phone...Done
Restarting phone...Done
