Huawei H30-U10 Flashtool Firmware
First you need the following files Download all and extract files anywhere in your computer.
- secro-sign.img
- ROM_H30-U10_V100R001C900B108_SIGNED.rar
-SPFlashTool3C.rar
- MediaTek USB VCOM drivers, Alternative Drivers
Open SPFLASHTOOL EXE and Load the Scatter file ( Click Scatter Loading)
Select the Android_Scatter.txt from the firmware you downloaded.
After you load the file, press download to start flashing your phone.
After you press download then follow this step,
- Turn off your phone or remove your battery then put it again because turn off is a must
- Press and hold volume up or volume down or you can press them both
- Then plug usb cable while pressing the volume button, release the button if the flashtool detected.
-Repeat step 5 until flashtool detect your phone.
Wait until the flashing is done.
file free
First you need the following files Download all and extract files anywhere in your computer.
- secro-sign.img
- ROM_H30-U10_V100R001C900B108_SIGNED.rar
-SPFlashTool3C.rar
- MediaTek USB VCOM drivers, Alternative Drivers
Open SPFLASHTOOL EXE and Load the Scatter file ( Click Scatter Loading)
Select the Android_Scatter.txt from the firmware you downloaded.
After you load the file, press download to start flashing your phone.
After you press download then follow this step,
- Turn off your phone or remove your battery then put it again because turn off is a must
- Press and hold volume up or volume down or you can press them both
- Then plug usb cable while pressing the volume button, release the button if the flashtool detected.
-Repeat step 5 until flashtool detect your phone.
Wait until the flashing is done.
file free