Welcome to Octopus Box Samsung software version 1.8.1
-----------------------------------------------------------------------------------
To connect SHV-E160K phone you have to perform the following steps:
1. Go to dial window.
2. Enter "319712358" number.
3. Enter "774632" password.
4. Go to System->SIO mode.
5. Select "Modem" radio button for USB section.
6. Go to dial window.
7. Enter "*#9090#" number.
8. Set "Diag config" to "USB" value.
9. Restart phone.
10. Press "Read Info" in software.
-----------------------------------------------------------------------------------
To connect GT-S5360 phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->Applications->Development.
3. Turn on "USB Debugging" option.
4. When the message appears press "Yes".
5. Connect USB cable to the phone.
6. Press "Read Info" in software.
Selected firmware file: S5360XXKI9_S5360XENKI3_XEN(2).oct
Please switch your phone to the download mode and connect it to a
PC.
To put GT-S5360 phone into download mode you have to perform the
following steps:
1. Reconnect phone battery.
2. Press and hold "Volume - " + "Home" + "Power" buttons.
3. When phone turns on press "Volume+" button.
Found phone on
Firmware write started.
Writing loke section...
loke section has been written successfully.
Writing modem section...
modem section has been written successfully.
Writing boot section...
boot section has been written successfully.
Writing system section...
system section has been written successfully.
Writing param_lfs section...
param_lfs section has been written successfully.
Writing cache section...
cache section has been written successfully.
Firmware writing successfully completed.
-----------------------------------------------------------------------------------
To connect SHV-E160K phone you have to perform the following steps:
1. Go to dial window.
2. Enter "319712358" number.
3. Enter "774632" password.
4. Go to System->SIO mode.
5. Select "Modem" radio button for USB section.
6. Go to dial window.
7. Enter "*#9090#" number.
8. Set "Diag config" to "USB" value.
9. Restart phone.
10. Press "Read Info" in software.
-----------------------------------------------------------------------------------
To connect GT-S5360 phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->Applications->Development.
3. Turn on "USB Debugging" option.
4. When the message appears press "Yes".
5. Connect USB cable to the phone.
6. Press "Read Info" in software.
Selected firmware file: S5360XXKI9_S5360XENKI3_XEN(2).oct
Please switch your phone to the download mode and connect it to a
PC.
To put GT-S5360 phone into download mode you have to perform the
following steps:
1. Reconnect phone battery.
2. Press and hold "Volume - " + "Home" + "Power" buttons.
3. When phone turns on press "Volume+" button.
Found phone on
Firmware write started.
Writing loke section...
loke section has been written successfully.
Writing modem section...
modem section has been written successfully.
Writing boot section...
boot section has been written successfully.
Writing system section...
system section has been written successfully.
Writing param_lfs section...
param_lfs section has been written successfully.
Writing cache section...
cache section has been written successfully.
Firmware writing successfully completed.
Last edited by a moderator:
