Huawei Y5 MYA-L22 FRP.....

[mhelskie]

Done in seconds.....

Exe version: NCKBox AndroidMTK 1.8.8.8
Selected model: Ascend Y5 [MYA-L22]
Action: Reset FRP
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM41)
Boot mode: Preloader
Using Algo 2.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6737T
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 2 GB DRAM
----------------------------------------------------
EMMC: (116Gb+16384Mb) SAMSUNG 0x514531334d42
EMMC FW VERSION: 0d:00:00:00:00:00:00:00
EMMC CID: 150100514531334D42 : 00000000000000
EMMC UA SIZE: 0x3a3e00000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x3a4a00000 [14.572 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM88)
-Reading GPT Drive OK
Checking data, wait...

Erasing FRP, wait...
FRP Reset Done.
Wait untill phone will start charging.
All done.

(l:0(l:0(l:0