REFERENCE Huawei Y600-U20 Hang Logo + WhiteScreen + Invalid IMEI - DONE

[Berdugo]

Huawei Y600-U20 Hang Logo + WhiteScreen + Invalid IMEI - DONE

Unit: Huawei Y600-U20

Problem: Hang Logo

Flash CM2/NCK/SPZTools (Ver. 3 & 5) = White Screen - Flash 4x with 4 Different SW = FAILED (ALL WHITE SCREEN)


Solution:

1. Flash kay NCK - White Screen Pdin pero may chime upon booting

Flash files count is :11 <<<<<<<<<<<<<<<<<<<<<<<<<<<<<< FLASH COUNT 11
Action : Firmware update.
Selected Model: 0-By CPU: MT6572_EMMC
Exe version: NCKBox AndroidMTK 1.8.7.8
Scenario: [4]Flash reset package <<<<<<<<<<<<<<<<<<<<<< SETTING FLASH RESET PACKAGE)
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek USB Port (COM18)
Boot mode: Brom
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6572_S00
BaseBand CPU Secure Version : 05
BaseBand CPU Bootloader Version : 00
----------------------------------------------------
EMMC: (29Gb+4096Mb) HYNIX 0x483447316404
EMMC FW VERSION: 05:00:00:00:00:00:00:00
EMMC CID: 90014A48344731 : 000000000000000000
EMMC UA SIZE: 0xe9000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0xe9c00000 [3.652 GB]
Preloader SEC version: 2
Status: USB_FULL_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detecting high speed port, wait......
Detected : MediaTek DA USB VCOM (Android) (COM19)
Warning, flashing preloader disabled!
If you change android version, preloader must be flashed.
Flash EMMC Algo Start.
Preloader backup already exist, skip saving.
Starting flash.
FORMAT EMMC FLASH : BEGIN: 0x33140000 - LEN: 0x17800000
FORMAT EMMC FLASH : BEGIN: 0x4a940000 - LEN: 0x4c800000
Download firmware to flash now...
Wait untill phone will start charging.


2 FLASH ULIT NG CUSTOM FILES

Flash files count is :3 <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<< FLASH COUNT 3
Action : Firmware update.
Selected Model: 0-By CPU: MT6572_EMMC
Exe version: NCKBox AndroidMTK 1.8.7.8
Scenario: [0]Safe Flash <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<< SETTING SAFE FLASH )
)Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek USB Port (COM18)
Boot mode: Brom
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6572_S00
BaseBand CPU Secure Version : 05
BaseBand CPU Bootloader Version : 00
----------------------------------------------------
EMMC: (29Gb+4096Mb) HYNIX 0x483447316404
EMMC FW VERSION: 05:00:00:00:00:00:00:00
EMMC CID: 90014A48344731 : 000000000000000000
EMMC UA SIZE: 0xe9000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0xe9c00000 [3.652 GB]
Preloader SEC version: 2
Status: USB_FULL_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detecting high speed port, wait......
Detected : MediaTek DA USB VCOM (Android) (COM19)
Warning, flashing preloader disabled!
If you change android version, preloader must be flashed.
Flash EMMC Algo Start.
Preloader saved in firmware directory.
Starting flash.
Download firmware to flash now...
Wait untill phone will start charging.

3. IMEI Repair - CM2

FINISH NA!!!

ETO PO ANG FW NG HUAWEI - CUSTOM ROM, PRE-COOKED PAG WHITE SCREEN ANG Y600-U20 - VIA CM2
>>>HERE<<<

PASS PROTECTED=))

 

[bhertmendoza]

pa pm po pass master salamat

 

[SilverTech]

Tested to 100% pwede rin sya sa nck dongle slamat po

 

[THEO23]

salamat po boss tested nga po sa mga nag white screen after flash............

done sa firmware mo....

 

[orus3b2]

wala ako nito ha reference ko to

thnks

 

[jimrexdeleon]

ANO POH PASS HAPPY NEW YEAR.... PA BLESSING NMAN SA PASS

 

[Pepz19]

Ano po password ng firmware po?