I747 galaxy s iii unlock done
Share ko lang mga boss I747 lock sa AT&T
TOOLS:
1. Octopus box samsung activated
2. Micro usb or micro uart
Kaya po micro usb or micro uart eh depende po sa inyo kung via usb or uart nyo sya i uunlock kasi po pwede nyo po i unlock ang I747 via usb or uart
PROCEDURE:
To connect SGH-I747M phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->Applications->Development.
3. Turn on "USB Debugging" option.
4. When message is appear press "Yes".
5. Go to dial window.
6. Enter "*#7284#" number to go into PhoneUtil.
7. Go to "Qualcomm USB Settings".
8. Select "DM + Modem + ADB".
9. Close window.
10. Go to dial window.
12. Enter "*#9090#" number.
13. Set "Diag config" to "UART" value.
14. Restart phone.
15. Press "Read Info" in Octopus Samsung software.
Kung mapapansin nyo sa procedure yung no. 13 na instruction eh (Set "Diag config" to "UART" value.) ang sa akin ginawa ko po eh ndi uart ang sinelect ko usb po para mas madali hehehe.
P.S.
Pwede nyo din po i unlock ang I747 sa z3x kung wala kayong octopus just select model T989
and eto po ang procedure
lubuslubusin ko na mga sir.
just switch phone to PDA ( *#7284# )
Select T989 model.
Connect phone with UART , and click unlock .
Kaso pag pinatay ang unit nag lolock ulit kaya nag decide ako na sa octopus ko tirahin at ayun kahit ilang beses ko i reboot eh unlock na
HERES THE
SCREENSHOT
Share ko lang mga boss I747 lock sa AT&T
TOOLS:
1. Octopus box samsung activated
2. Micro usb or micro uart
Kaya po micro usb or micro uart eh depende po sa inyo kung via usb or uart nyo sya i uunlock kasi po pwede nyo po i unlock ang I747 via usb or uart
PROCEDURE:
To connect SGH-I747M phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->Applications->Development.
3. Turn on "USB Debugging" option.
4. When message is appear press "Yes".
5. Go to dial window.
6. Enter "*#7284#" number to go into PhoneUtil.
7. Go to "Qualcomm USB Settings".
8. Select "DM + Modem + ADB".
9. Close window.
10. Go to dial window.
12. Enter "*#9090#" number.
13. Set "Diag config" to "UART" value.
14. Restart phone.
15. Press "Read Info" in Octopus Samsung software.
Kung mapapansin nyo sa procedure yung no. 13 na instruction eh (Set "Diag config" to "UART" value.) ang sa akin ginawa ko po eh ndi uart ang sinelect ko usb po para mas madali hehehe.
P.S.
Pwede nyo din po i unlock ang I747 sa z3x kung wala kayong octopus just select model T989
and eto po ang procedure
just switch phone to PDA ( *#7284# )
Select T989 model.
Connect phone with UART , and click unlock .
Kaso pag pinatay ang unit nag lolock ulit kaya nag decide ako na sa octopus ko tirahin at ayun kahit ilang beses ko i reboot eh unlock na
HERES THE
SCREENSHOT